Would a 30" tire slow me down?
12-20-2008, 09:12 PM
#22
I don't think you will be able to get around triming the front of the rear quarter panel.
Here is a pic of our car with 30" slicks and the stock length 12 bolt with 15x10 and 7.5 BS.
Here is a pic with 30" slicks and our Strange 12 bolt narrowed 3" on each side with 15x10s.
Here is a pic of our car with 30" slicks and the stock length 12 bolt with 15x10 and 7.5 BS.
Here is a pic with 30" slicks and our Strange 12 bolt narrowed 3" on each side with 15x10s.
12-20-2008, 09:31 PM
#24
You may be able to, just be careful how much you move it back. The driveshaft is pulled out of the tranny the same amount. Just a thought.
I do agree that trimming the rear plastic is much easier than jacking with the front metal part. Just leave room for tire growth.
I do agree that trimming the rear plastic is much easier than jacking with the front metal part. Just leave room for tire growth.
12-20-2008, 10:24 PM
#28
9 Second Club
iTrader: (5)
Join Date: Aug 2006
Location: Lee's Summit, MO
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
My 295 Hoosier DR's grow plenty. In the front of the rear tire I have over 1" clearance with the car sitting....yet for some reason the paint is missing off the front of the wheelwell.
I think the radials still "whip" around. I have pushed my axle back enough that I have only 3/4" clearance in the back and like I said over 1" in the front.
No paint is being scrubbed off the back even with the tighter clearance, but she's making shiny metal in the front.
I think the radials still "whip" around. I have pushed my axle back enough that I have only 3/4" clearance in the back and like I said over 1" in the front.
No paint is being scrubbed off the back even with the tighter clearance, but she's making shiny metal in the front.
12-21-2008, 03:09 AM
#29
Hmmmm? I can't imagine that. I could see maybe a 1/4" during a burnout at best, but a full inch? I'd make sure everything in the rear suspension is good and tight.
FWIW- I don't have more than 1/2" in front of the back tires and I'm not rubbing at all using the Hoosier Radial slicks or the 29x10.5Ws.
FWIW- I don't have more than 1/2" in front of the back tires and I'm not rubbing at all using the Hoosier Radial slicks or the 29x10.5Ws.
12-21-2008, 03:53 AM
#30
TECH Veteran
iTrader: (10)
Join Date: Jul 2006
Location: Rialto CA
Posts: 4,770
Likes: 0
Received 0 Likes
on
0 Posts
I don't think you will be able to get around triming the front of the rear quarter panel.
Here is a pic of our car with 30" slicks and the stock length 12 bolt with 15x10 and 7.5 BS.
Here is a pic with 30" slicks and our Strange 12 bolt narrowed 3" on each side with 15x10s.
Here is a pic of our car with 30" slicks and the stock length 12 bolt with 15x10 and 7.5 BS.
Here is a pic with 30" slicks and our Strange 12 bolt narrowed 3" on each side with 15x10s.
god i love your car!
12-21-2008, 09:38 AM
#31
My 295 Hoosier DR's grow plenty. In the front of the rear tire I have over 1" clearance with the car sitting....yet for some reason the paint is missing off the front of the wheelwell.
I think the radials still "whip" around. I have pushed my axle back enough that I have only 3/4" clearance in the back and like I said over 1" in the front.
No paint is being scrubbed off the back even with the tighter clearance, but she's making shiny metal in the front.
I think the radials still "whip" around. I have pushed my axle back enough that I have only 3/4" clearance in the back and like I said over 1" in the front.
No paint is being scrubbed off the back even with the tighter clearance, but she's making shiny metal in the front.
Take your car for example, not superlight and puling the whees up the tire may bulge out toward the front of the car during hard launches because of all the weight and force being put on the contact point on the tire and bulge rearward during hard deccelaration.
12-21-2008, 09:54 AM
#32
9 Second Club
iTrader: (5)
Join Date: Aug 2006
Location: Lee's Summit, MO
Posts: 350
Likes: 0
Received 0 Likes
on
0 Posts
Good idea.....yeah, now that you say that, I bet it is happening during the launch. I've got some good stills of it about 15' out and its distorting the tires pretty good even running 18 psi in the DR's.
12-21-2008, 11:11 AM
#33
Coal Mining Director
iTrader: (17)
Join Date: Nov 2001
Location: Virginia
Posts: 4,442
Likes: 0
Received 0 Likes
on
0 Posts
My 295 Hoosier DR's grow plenty. In the front of the rear tire I have over 1" clearance with the car sitting....yet for some reason the paint is missing off the front of the wheelwell.
I think the radials still "whip" around. I have pushed my axle back enough that I have only 3/4" clearance in the back and like I said over 1" in the front.
No paint is being scrubbed off the back even with the tighter clearance, but she's making shiny metal in the front.
I think the radials still "whip" around. I have pushed my axle back enough that I have only 3/4" clearance in the back and like I said over 1" in the front.
No paint is being scrubbed off the back even with the tighter clearance, but she's making shiny metal in the front.
12-21-2008, 03:15 PM
#34
As much as 1" or more? wow.
12-22-2008, 06:06 PM
#36
Stuck them on there today. No 1/4 panel cutting required! In fact, I only extended by LCA's by about 1 full turn, maybe 3/16"? I have about 1/2" between the tire and 1/4. I did have to cut my rear bumper some, not alot though. It was already cut for some big M&H's I had (28"). I need to drop it a little now. I have to cut some material out of the wheel well, mainly the area that is front of the spring. Other than that, a little hammering will fix the rest. Its tight, but I think it'll work. I'll post pics when my dumbass wife stops taking my camera to work.
12-22-2008, 09:30 PM
#40
My wife is still gone. Bitch took my camera. Its MY camera, WTF? Her goddamn blackberry has a camera, WTF?
Anyway, did a little cutting with the plasma tonight, got 90% of it done. I'm still hitting at the front at about the 9-10 o'clock position. I threw my 3/16" spacers on just for grins and everything clears, so I'm close. These are big *** tires! I'm not sure how I feel about them yet. The car sits pretty damn high now. What I might do is mini tub it, and get a wheel with like 7-7.5" BS and tuck these in more. Then I can drop the car over it.
Anyway, did a little cutting with the plasma tonight, got 90% of it done. I'm still hitting at the front at about the 9-10 o'clock position. I threw my 3/16" spacers on just for grins and everything clears, so I'm close. These are big *** tires! I'm not sure how I feel about them yet. The car sits pretty damn high now. What I might do is mini tub it, and get a wheel with like 7-7.5" BS and tuck these in more. Then I can drop the car over it.