camaro_best

hi
i want to order Torque Arms
.. but i don't know which one is better for me
in the future i'm planning for TH400 + 12bolt
my mod

see my sig

danhr

iTrader: (18)

I snapped my umi torque arm, when my car was only a bolt on lt1

the_merv

iTrader: (88)

I have the one that is Tunnel Brace mounted..

z28rob18

iTrader: (7)

i lik that torque arm i think its gonna be the one i use i no im goin with there front suspension package so i think ill stick with them and get the rest there to

9sec93

iTrader: (67)

BMR extreme duty or the madman. you will never need to buy another one.

BMR Tech

iTrader: (9)

I do not offer a tunnel mounted style torque arm but I do offer a full length torque arm with a torque arm relocation bracket. Both are on Sale till Xmas!!

Let me know if you have any questions

danhr

iTrader: (18)

I'd only recommend those if it's a flat out drag car.

if it's a weekend toy that will visit the track, i'd say go w/ spohn.

but that's just through my personal experience

camaro_best

it's drag race
who said BMR !!!! why you said BMR ?? did you try it ? and did you try the UMI ?

ndfrsd6

iTrader: (5)

ive seen a few UMI T/A snap ...BMR here

1BADAIR

iTrader: (1)

i have only seen the first design UMI's break. which ones have you guys seen break?

TwoFast4Lv

iTrader: (8)

Nice stuff. Unfortunately both of those I have installed we had to cut the DS loop off to get it to fit

danhr

iTrader: (18)

what was the driveshaft loop hitting?? I've installed two of them, and didn't have any issues with fitment.

and yes, the torque arm i broke was the earlier design.

If I could do it all over again, and did a little research, I would of bought a spohn one.... it's lighter, the welds don't break, and you can adjust the overal length of the torque arm.... making it as short as possible

BADD SS

iTrader: (4)

I have seen almost all tq arms break all for different reasons. I broke a track pack BMR, and swore never again would I buy parts I could make myself.... My 4130 one hasnt broken yet... I Know of 1 spohn, and 2 bmr's that have broken locally....

9sec93

iTrader: (67)

i figured if he was going with a th400 and a 12 bolt, he might as well get a bullet proof torque arm to go with. if he wasnt planning the trans and the rear then i would say there is no reason for a torque arm like.

98blueSScamaro

iTrader: (14)

The old umi T/Q arm is the one that snap's and they updated them cuz of the snaping. I know i snaped mine



UMI is a good vendor and they backup there stuff. after i broke mine there was a new one on the car in 3day's.

MADMAN

iTrader: (4)

I would either recommend the BMR Extreme duty or ours. I have tuned alot of suspensions on the 4th gen f-bodies and I wont use any others.

ss2000

iTrader: (45)

Is the UMI torque arm still the only one that will fit with TSP duals?

UMI Performance

iTrader: (77)

We have actually only had a few break out of thousands of torque arms... the ones that did break were a older design from years ago and the issue has been corrected. Also all customers that contacted us regarding there broken torque arms were replaced free of charge with a new design...

y2k_ta

iTrader: (80)

UMI Performance on both of my 'birds...one a body mount & one a full-length. No complaints here.

bigsticksupra

iTrader: (3)

My friend broke the newest design UMI tunnel mount torque arm but they sent him a new one for free.. which was nice of them. Then i saw the one with the cracks on the cross member and that was kinda discouraging. Every time i race my car, im scared that the torque arm will come through the shifter! haha jk