Heyfred

iTrader: (10)

Welded caps on the openings, then, welded the seam around the cut out area.

Heyfred

iTrader: (10)

Rear tires tires came today. I should hook up now, they are huge, 295/55/15.
Brakes should be here tomorrow. Waiting on axles.

LS1rob00

iTrader: (9)

Lookin good, love those Weld RTS wheels.

98 grmrpr

Hey man, I run the rt's on my camaro. You got your diff shortened 3 inches a side so what backspace did you get? How much room have you got inboard? I think I read you had 10's, I cant remember I think I have 12's, and burkharts are fabbin me a diff 5 inches short a side for my set up. Just curious to wheel offset.

Heyfred

iTrader: (10)

4.5" bs

15x9"

Heyfred

iTrader: (10)

Rear brakes came today.



Need axles to fabricate the caliper radial mount tabs on the housing.

Here is an idea what the ole girl will look like.

stangtrader

iTrader: (2)

Nice work as usual Keith. Hopefully ill see you at the track this summer

wws699

iTrader: (3)

Looks GREAT kid!

One thing I did notice though........... The bottom of the car is cleaner than the top, what gives?

Ryan K

iTrader: (11)

When are you planning on making it back to the track? Looking forward to seeing this car in person.

LS1rob00

iTrader: (9)

Being thorough and meticulous! This car is awesome.

wws699

iTrader: (3)

As soon as he get's the axels and rear brakes finished.. I would assume

Fbodyjunkie06

iTrader: (10)

No offense, but I have been 1.29 60' on afco coilover's on motor off the footbrake. The coilover design was not your problem.

Good luck with the rest of the build.

Heyfred

iTrader: (10)

Axles and axle bearing retainers have arrived. Had .625" studs installed. Getting brake brackets lazer cut to be welded on the housing for the radial brake mount.



Working on a 10 gallon fuel cell that stock Evap can be used on. It will be a direct bolt in tank and you use your existing Evap components.

BAMALS1

iTrader: (16)

Man I love how the rear tires are "tucked'. Looks killer. Imprressive!

oldmano2z

i too just read your whole thread . your parents must be proud of you,good job!!! if and when you put in a roll bar or cage i'd like to follow your build for ideas. i too have a 1SC coupe wouldn't sell it or trade for the world . hell i crashed it labor day weekend and it took me 3 months to put a complete front end on it. i kicked myself in the *** every day i worked on it . good luck and keep up the good work!!! the oldman.....

stangtrader

iTrader: (2)

Hey Keith your tabs are expired again lol. Keep up the excellent work

Heyfred

iTrader: (10)

Picked up lazer cut rear brake caliper brackets today. By the end of the week I should have rearend back in the car.



Working on the 10 gallon fuel tank also. Finalizing the drawings for fabrication.

wws699

iTrader: (3)

Nice

stangtrader

iTrader: (2)

Hey keith, out of curiosity why are you keeping the evap stuff? As of this year you cannot fail do to any evap codes and the codes can be turned off threw tuning software.

studderin

iTrader: (28)

oh crap, I forgot to mail him out my old Evap stuff. derrrrrrr