Pics of 11.03 stock internal car
07-21-2009, 08:43 PM
#101
No idea how much it will be over stock. The car will be mocked up with the wheels and tires which will be tucked up inside the fender well. Its getting tubbed. Once I get all that in place then I will measure for the housing. It just needs offset spacers for the lca's instead of them being in the middle.
09-17-2009, 07:34 PM
#109
a little. I can only work on it from 10pm till 12-1 am. Im putting full tubs in it right now. Drivers side is done. haly way done with the passenger side. Lightening the car up a lot as well. I'm also putting a 25.1e/25.2/25.3 floor bars in it so I can upgrade it later down the road.
Ive taken about 75 lbs off the back of the car and 100 lbs off the front with the spindle/brakes/th350.
going to start building a chromoly sheetmetal housing for it real soon.
Had the wheels mocked up under it the other day. tucks a 28" tire pretty good.
Ive taken about 75 lbs off the back of the car and 100 lbs off the front with the spindle/brakes/th350.
going to start building a chromoly sheetmetal housing for it real soon.
Had the wheels mocked up under it the other day. tucks a 28" tire pretty good.
sounds like nice work robbie 
