I wanna lose some weight.. 3966lbs
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
My car needs a diet, here is the breakdown on whats added over factory:
Entire D1-SC setup (headunit, twin IC's, piping etc.)
Alkycontrol Meth Kit (single nozzle)
3 Core Radiator
6 point Wolfe w/swingouts
Moser 12 bolt
BMR Heavy Duty Anti-roll Bar
Spohn lower control arms, panhard, SFC's, relocation brackets
Fuel system
It's an aluminum block 396 car too, so nothing really added there.
The car has zero weight reduction and with me in it (I weigh 175), the Bogarts with 28 M/T DR's it weighs 3966 lbs with 1/2 tank of 93.
Anybody have any ideas of what I can do to shed a few hundred pounds off it? It is a street car so I don't want it super loud on the inside (dumped 3" magnaflow race mufflers), but other than that, I don't care. Thanks!
Entire D1-SC setup (headunit, twin IC's, piping etc.)
Alkycontrol Meth Kit (single nozzle)
3 Core Radiator
6 point Wolfe w/swingouts
Moser 12 bolt
BMR Heavy Duty Anti-roll Bar
Spohn lower control arms, panhard, SFC's, relocation brackets
Fuel system
It's an aluminum block 396 car too, so nothing really added there.
The car has zero weight reduction and with me in it (I weigh 175), the Bogarts with 28 M/T DR's it weighs 3966 lbs with 1/2 tank of 93.
Anybody have any ideas of what I can do to shed a few hundred pounds off it? It is a street car so I don't want it super loud on the inside (dumped 3" magnaflow race mufflers), but other than that, I don't care. Thanks!
#2
TECH Veteran
iTrader: (7)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Front and rear bumper supports? I think that would be about 80 lbs. Air bags are really heavy too. Might be able to kill off about that much weight again. Relocate battery in the back so at least the weight is in a better place.
Take a look in the sticky for all the weight lists.
Take a look in the sticky for all the weight lists.
Trending Topics
#8
#10
10 Second Club
iTrader: (41)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
What I would do on a street car is remove the bumper supports, use a lightweight battery, tubular K, ditch the back seats (unless you need them), lose the TCS/ABS, and use CM on the suspension stuff whenever you can.
I have my iron block/D1SC car down to about 3100 w/o driver, but I removed the HVAC, installed the speedglass back window, installed manual drag brakes, and have a TH400.
The TRZ rear sway bar is really nice, it will drop alot of weight if you're using one of the spohn or BMR drag bars.
Bottom line is once you get past the "free stuff" (bumpers, spare/jack, backseat, etc) be prepared to either make sacrifices to your comfort or sacrifices to your budget.
I have my iron block/D1SC car down to about 3100 w/o driver, but I removed the HVAC, installed the speedglass back window, installed manual drag brakes, and have a TH400.
The TRZ rear sway bar is really nice, it will drop alot of weight if you're using one of the spohn or BMR drag bars.
Bottom line is once you get past the "free stuff" (bumpers, spare/jack, backseat, etc) be prepared to either make sacrifices to your comfort or sacrifices to your budget.
#11
Internet Mechanic
iTrader: (17)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It really depends if this car is a street car that sees the track or a track car that sees the street. If you roll around with the 6 point all the time and the bar is protecting your side is there, then you can remove the door bars. You can put a Burkhart bumper support, remove HVAC/Stereo.
Lightweight carpet etc etc, there is alot there you can do. Just Depends on your tolerence.
Lightweight carpet etc etc, there is alot there you can do. Just Depends on your tolerence.
#12
TECH Apprentice
iTrader: (106)
Join Date: Jun 2007
Location: Eastland,Texas
Posts: 367
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Not if you will cut the upper part off the bumper you can leave a thin strip of the metal that retains fog lights and lower bumper supports. I have done this with my last two cars and it works great and only weighs two or three pounds