screwing radials
#1
7 Second Club
Thread Starter
iTrader: (42)
Join Date: Jun 2004
Location: paducah, ky
Posts: 4,558
Likes: 0
Received 0 Likes
on
0 Posts
screwing radials
i know it says not to but i see alot of people doing it.... who all is screwing their radials? any problems encountered?
who's using the precious, beautiful double beadlock wheels?
who's using the precious, beautiful double beadlock wheels?
Trending Topics
#14
10 Second Club
Join Date: Apr 2005
Location: Clarksville, IN
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
Mine are screwed only because the draglites I bought used already had the screw holes in them. Air was leaking at some of holes so I went ahead and put the screws in. They have been on for over a year now with no problems.
#15
7 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,834
Likes: 0
Received 1 Like
on
1 Post
The 7.30 car is a 3400 lb '84 Camaro with a BBC and a F3 procharger, best of 1.28 60 foot.
My Nova has gone 1.39 on the 60 foot on a set of 275/60/15 radials w/ no movement.
Derek
#17
8 Second Club
iTrader: (3)
Join Date: Sep 2003
Location: South Hill, Va
Posts: 453
Likes: 0
Received 0 Likes
on
0 Posts
i used screws in mine and have been a 1.19 60' on 275's. rpm does not use screws and has been a 1.18 60' on 275's. i say either way you go you should be ok. i just like them for a little insurance.