light weight hood for trans am?
#1
11 Second Club
Thread Starter
iTrader: (12)
Join Date: May 2005
Location: Cedar Rapids, IA
Posts: 1,142
Likes: 0
Received 0 Likes
on
0 Posts
light weight hood for trans am?
Hey guys, is there a light weight hood for TA's? Ive got a stock WS6 hood right now, but would like to see if I can find a decent light weight hood for the car. Thanks in advance.
#2
I write checks with my mouth that my ass can't cash
iTrader: (7)
Join Date: Oct 2009
Posts: 948
Likes: 0
Received 0 Likes
on
0 Posts
the ws6 hood is really light from what iv heard...its fiberglass from the factory and i think it weighs like 11 pounds or something like that...i would spend the 1000 dollars that ur going to spend on hood and paint on something else !!
#3
11 Second Club
Thread Starter
iTrader: (12)
Join Date: May 2005
Location: Cedar Rapids, IA
Posts: 1,142
Likes: 0
Received 0 Likes
on
0 Posts
its def ALOT more then 11 lbs. I just picked up my buddies aftermarket VFN hood the other day, and that thing is LIGHT! He had an SS hood on it before, and that VFN is TONS lighter. I mean granted it fits like absolute hell, but its light.
#4
TECH Enthusiast
iTrader: (25)
Join Date: Nov 2001
Location: shreveport, Louisiana
Posts: 648
Likes: 0
Received 0 Likes
on
0 Posts
Joe VanO carbon fiber hood here. Fits like a glove and is the lightest thing on the planet. But very expensive about 1200-1500 depending on who you get it from plus about 4 to 6 month wait.
#5
Race your car!
iTrader: (50)
The LAT to teh joe van o is the sloped 5 inch ws6 hood that VFN makes, I have one here, fitment will be pretty good once I get it mounted, just laying the hood on the car you can see it will fit pretty well.
Wipers will have to go, as it covers the entire cowl up to the windshield, and it's a pin on like the joe van o. I can tell you, it's about 14 lbs before trimming/painting, so figre 15 with paint I'd guess after being mounted. Stock ws6 hood when I took mine off was like 47 lbs if I remember right, then figure the release cable, handle, hood latches, hood hinges, hood shocks, all that stuff that gets to go. Granted you'll need 5 lbs in rails, but you're probably losing another 5 lbs in all that other stuff that goes away.
Wipers will have to go, as it covers the entire cowl up to the windshield, and it's a pin on like the joe van o. I can tell you, it's about 14 lbs before trimming/painting, so figre 15 with paint I'd guess after being mounted. Stock ws6 hood when I took mine off was like 47 lbs if I remember right, then figure the release cable, handle, hood latches, hood hinges, hood shocks, all that stuff that gets to go. Granted you'll need 5 lbs in rails, but you're probably losing another 5 lbs in all that other stuff that goes away.
Trending Topics
#18
10 Second Club
iTrader: (41)
Yeah, get back to me after actually using those 1/4 turns. They ******* suck. My buddy has 4 small pins on his WS6 and it looks 100X better than any rail setup I've seen.
Or if you wanna be really slick get the aerocatch latches. 4 of those will hold anything and you can lock them.