New round of bullets for this year
#1
New round of bullets for this year
Received pistons today for our race car, thought I'd share.
Heres some background on the car,
'68 Camaro run in NMCA super street ("10.5")
Was featured in Car Craft 03/09
http://www.carcraft.com/techarticles...evy/index.html
Runs up to 4 stages of nitrous, FAST XFI computer, 160lbs hr injectors.
11.1 Dart billet block 5.00" bore spacing
4.750" bore size
14.5:1 compression
GRP Aluminum rods
CFE 14º heads
Liberty 5 speed (pro stock trans)
Car is sponsored by CP pistons, Rick put together a great set of slugs for this
year. New forging saves approx 16 oz. out of the rotating assembly.
We're looking for a 6.6X this year.
heres a video from last year
http://www.youtube.com/watch?v=7ditiZ84BFE
Heres some background on the car,
'68 Camaro run in NMCA super street ("10.5")
Was featured in Car Craft 03/09
http://www.carcraft.com/techarticles...evy/index.html
Runs up to 4 stages of nitrous, FAST XFI computer, 160lbs hr injectors.
11.1 Dart billet block 5.00" bore spacing
4.750" bore size
14.5:1 compression
GRP Aluminum rods
CFE 14º heads
Liberty 5 speed (pro stock trans)
Car is sponsored by CP pistons, Rick put together a great set of slugs for this
year. New forging saves approx 16 oz. out of the rotating assembly.
We're looking for a 6.6X this year.
heres a video from last year
http://www.youtube.com/watch?v=7ditiZ84BFE
Last edited by AES Racing; 03-02-2010 at 01:01 AM.
#4
Race your car!
iTrader: (50)
That's a nice piston for sure, I like what they did with the skirt on it, should be really low drag like that.
And welcome aboard as a sponsor, it's nice to have another engine builder on here, especially one that does alot with nitrous
I should have you quote rebuilding my 402, with a few changes in an effort to try to get to 8.50 in the event that I can't get it sold to start a fresh setup
And welcome aboard as a sponsor, it's nice to have another engine builder on here, especially one that does alot with nitrous
I should have you quote rebuilding my 402, with a few changes in an effort to try to get to 8.50 in the event that I can't get it sold to start a fresh setup
#5
10 Second Club
iTrader: (10)
It is nice to see AES as a Sponsor here. Especially with them so close to me!!!!!
I've seen a lot of AES cars running in the past few years and I look forward to seeing more of what you guys have to offer. Unfortunately the only guy I know personally that ran your engines sold his setup a few years ago.
Those look like some slick pistons. You guys sure know how to build them.
~Jim~
I've seen a lot of AES cars running in the past few years and I look forward to seeing more of what you guys have to offer. Unfortunately the only guy I know personally that ran your engines sold his setup a few years ago.
Those look like some slick pistons. You guys sure know how to build them.
~Jim~
Trending Topics
#10
Thanks guys, no Bradenton for us this year, going to NMCA Joliet, Milan, Memphis
True Street at GLD, and atleast 1 RSD
hopefully go back to canada to defend our title
http://s702.photobucket.com/albums/w...rnationals.flv
True Street at GLD, and atleast 1 RSD
hopefully go back to canada to defend our title
http://s702.photobucket.com/albums/w...rnationals.flv