slammed f-bodys with 325/50 or 28/10.5 no tubs
#1
slammed f-bodys with 325/50 or 28/10.5 no tubs
dont care about rear width or backspacing as long as your not tubbed whose done it and got pics?
how low did you get it without running into problems? i know im going to have to cut the trans tunnel but want to keep the stock plastics on the sail panels uncut...
how low did you get it without running into problems? i know im going to have to cut the trans tunnel but want to keep the stock plastics on the sail panels uncut...
#5
11 Second Club
iTrader: (37)
I'd like to see some of these cars also, if it's even possible. I'm not mini-tubbed but I'm going with some 28x10.50-15 on 15x10" wheels and my car is lowered. Hoping I don't need to raise the car to fit the tires/wheels.
Mike
#7
Trending Topics
#12
9 Second Club
iTrader: (21)
My car is decently low, we had stock springs, cut one full coil with no isolators and it was the perfect stance but with a 28x10.5 stiff it would have hit the fender lips when the tire grew and we didnt want to roll them, so we put the rear isolators back in and it still looks pretty good.
#13
10 Second Club
iTrader: (41)
The silver car above seems to have an F body offset type rim on it but it also looks like the frontside of the 1/4 panel was trimmed out some, like when guys run 29"-30" tires. It looks pure evil though!
It is easier to "tuck" a 28/10.5 than a 325, 325 is more like a 10.5W tire.
It is easier to "tuck" a 28/10.5 than a 325, 325 is more like a 10.5W tire.
#14
11 Second Club
iTrader: (37)
My car is decently low, we had stock springs, cut one full coil with no isolators and it was the perfect stance but with a 28x10.5 stiff it would have hit the fender lips when the tire grew and we didnt want to roll them, so we put the rear isolators back in and it still looks pretty good.
Mike
#15
9 Second Club
iTrader: (21)
We use a stock length 9inch with what i'm guessing is 7.5" backspace Bogarts.
here is a vid of the current stance, dont have any pics. this is stock springs with one coil cut and stock isolators.
[IMG]9.92 Pass[/IMG]
here is a vid of the current stance, dont have any pics. this is stock springs with one coil cut and stock isolators.
[IMG]9.92 Pass[/IMG]