I have a couple sets of blems in stock for cheap...

 

prices? and pics?

 

those cheapy covers i have a set they do not work with etp heads and do not clear yella terra rockers i had to cut the tabs off inside them but still to much work so in my opion not worth it i went with a 1 inch spacer and no leaks

 

Well i just ordered those ebay ones without coil pack brackets hopefully they will work out getting two -10 bungs welded into them

 

They don't work with ETP heads, damn it And if they don't clear yella terra's, my crower stuff isn't gonna clear either.

Back to the drawing board.


ET sells some valve covers don't they?

 

have u tried katech yet? there covers look awesome i just cant afford those right now

 

I haven't, but they are on the list.

 

i was in stenod the other day and those are the only ones they ever run i was told. never had problems

 

Knowing Katech's rep I'm sure everything they sell is mint.

400 bucks is a good bit of $$ but I'll deal with it. Main concern, is not having them leak, I'll have to give them a call, and see if I can get the drivers side with a -10 or -12 bung on it for the vacuum pump, both with a -10 would be perfect.