Dyno'd the ta. Video inside
#1
Dyno'd the ta. Video inside
Finally got my turbo ta tuned today. For anyone that hasn't follwed the build threads the run down is.
Mwc everything, fab 9, drc th400, forged 370, 317 heads and a home built turbo kit with a precision 76 mm on it.
Car made 590 to the wheels between 9 and 10 psi! i am very happy with the results. The fuel pressure was falling off from 60 to 44 At these levels, and i ran out of injector. I need to get the fueling issue worked out, i believe its because i only have 1 hotwire kit powering 2 walbro 255's.
Anyways We turned it down a little to 9 psi, and the car made 576 whp @ 17 degrees of timing. There is alot left in it, and we will be pushing to atleast 15 psi in a couple weeks.
We plan on going to the track and running it @ the 576 hp next weekend, just to get a couple test passes done.
http://www.youtube.com/watch?v=4_fazgVVITU
Thanks, Chris
Mwc everything, fab 9, drc th400, forged 370, 317 heads and a home built turbo kit with a precision 76 mm on it.
Car made 590 to the wheels between 9 and 10 psi! i am very happy with the results. The fuel pressure was falling off from 60 to 44 At these levels, and i ran out of injector. I need to get the fueling issue worked out, i believe its because i only have 1 hotwire kit powering 2 walbro 255's.
Anyways We turned it down a little to 9 psi, and the car made 576 whp @ 17 degrees of timing. There is alot left in it, and we will be pushing to atleast 15 psi in a couple weeks.
We plan on going to the track and running it @ the 576 hp next weekend, just to get a couple test passes done.
http://www.youtube.com/watch?v=4_fazgVVITU
Thanks, Chris