summitproducts

iTrader: (10)

getting ready to hang my bumpers on my firebird and looking for some good ideas. thanks

JL ws-6

iTrader: (50)

Here's what I'm going to model mine after.....

PRAY HRD

iTrader: (119)

+1 wondering about this but looking for a simpler setup if available. I know MWC sells them for $150 each (front & rear) but there's no pics on their site. Anyone else sell them?

JL ws-6

iTrader: (50)

Burkhart. Little more $ then that but I know that you have the option of putting a radiator in theirs, fuel cell in theirs, as well as the fog lights and whatnot are all there as well.

Broke EF

We are making one this winter, Ill have pics up as we progress.

Sean

Steve Burger

iTrader: (33)

We have pics on our site and lots in here. Just search Burkhart Bumper support. You can also look in several issues of GM HighTech including the current one.

TA1364

iTrader: (11)

Are these supports more for creating room than loosing weight?

Steve Burger

iTrader: (33)

Both. Ours loose quite a bit of weight and create a lot of room. They are made of the correct diameter and wall thickness tubing to cert as an NHRA fuel cell enclosure. We have put fuel cells, intercoolers, radiators, oil coolers, and trans coolers in the support. For my car we have a chiseled 2000 HP A2W IC and a radiator with remote pump.

HioSSilver

iTrader: (8)

here's mine

summitproducts

iTrader: (10)

yeah thats pretty much what im looking for. do you happen to have a front view of that set up? thanks.

studderin

iTrader: (28)

mines really light


http://i2.photobucket.com/albums/y11...n/IMG_5133.jpg
http://i2.photobucket.com/albums/y11...n/IMG_5136.jpg
http://i2.photobucket.com/albums/y11...n/IMG_5137.jpg
http://i2.photobucket.com/albums/y11...n/IMG_5143.jpg

HioSSilver

iTrader: (8)

uuuhhhh wow.....can ya hack it up anymore?

mike135531bubba

iTrader: (45)

I know you're all about weight reduction so maybe it's time to switch over to a single fan? And when are you gonna get rid of that air dam?

GhostofKrypton

iTrader: (7)

burkhart here....it is great!

PRAY HRD

iTrader: (119)

what's the weight on that burkhart please??

mike135531bubba

iTrader: (45)

10-11 lbs, half the weight of the factory bumper support.

223HAWK

iTrader: (11)

Yeah Id like to know how much lighter it really is vs the factory bumper support..

HioSSilver

iTrader: (8)

I got 7#'s out of my factory bumper by drilling it... I think it weighed 20#'s for a stock bumper.

WS6 SRT-8

iTrader: (18)

[QUOTE=GhostofKrypton;14348808]burkhart here....it is great!

Is that a boxer? And why no foglight mounts?

Steve Burger

iTrader: (33)

We make them with or without foglight mounts for the TA.