So, how badly will 500 street miles on brand new MT DR's
#21
9 Second Club
iTrader: (27)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I daily drove some Nitto 555r drag radials and they were still hooking when I took them off.
So far I haven't got the M/T Et Street radials to hook well, but they are 325/50 didn't realize I needed to go under 16# with them and possibly as low as 12# per M/T recommendation.
So far I haven't got the M/T Et Street radials to hook well, but they are 325/50 didn't realize I needed to go under 16# with them and possibly as low as 12# per M/T recommendation.
I run mine at 12 at the track, only way I could get them to hook. Cut 1.3 60's, air em back up and go home.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
#22
7 Second Club
iTrader: (5)
Join Date: Nov 2001
Location: Gainesville, Florida # of drag strips runs: ?!?!?
Posts: 8,834
Likes: 0
Received 1 Like
on
1 Post
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Based on the responses I think you shouldn't worry.
BTW, my M/T ET Street 275/60s are my driver tires, and I run them on the street and the track without any issues. I put about 350 miles on a brand new set during the times when my local track was closed, then went out and cracked a 1.39 60 foot on just their second pass.
Derek
BTW, my M/T ET Street 275/60s are my driver tires, and I run them on the street and the track without any issues. I put about 350 miles on a brand new set during the times when my local track was closed, then went out and cracked a 1.39 60 foot on just their second pass.
Derek