SS wannabe drag car progress!!!!
07-28-2014, 09:20 PM
#247
10 Second Club
Thread Starter
iTrader: (27)
Join Date: Mar 2009
Location: Kissimmee, FL / Vienna, VA
Posts: 810
Likes: 0
Received 1 Like
on
1 Post
I haven't updated in a while so I thought I'd share my recent progress.
Got my engine back (434" LSX, Mast PXR Heads, Diamond Pistons, GRP Rods, Bullet Cam, ATFSpeed Motorplate, ARE Dry Sump Pan):
Got my 2 speed TH400 and bolt-together converter from ATFSpeed:
Got most of the electronics mounted to the dash bar (Holley Dominator, MSD Powergrid, and a Spaghetti Menders system):
Starting to fit the Glasstek dash:
Cut the cowl, made a new piece, fit the Optic Armor glass, and refit the dash to the new cowl piece:
Starting on exhaust as soon as I get my dry sump pump back from Dailey Engineering:
Got my engine back (434" LSX, Mast PXR Heads, Diamond Pistons, GRP Rods, Bullet Cam, ATFSpeed Motorplate, ARE Dry Sump Pan):
Got my 2 speed TH400 and bolt-together converter from ATFSpeed:
Got most of the electronics mounted to the dash bar (Holley Dominator, MSD Powergrid, and a Spaghetti Menders system):
Starting to fit the Glasstek dash:
Cut the cowl, made a new piece, fit the Optic Armor glass, and refit the dash to the new cowl piece:
Starting on exhaust as soon as I get my dry sump pump back from Dailey Engineering:
