99 Z28 275 Drag radial build
#22
10 Second Club
iTrader: (10)
Man the RS class is taking off! When I am able to throw all the boost my turbo has at my car, I might foray into this class and see here I stand. I really don't see myself running faster than 5.7's-5.8's but it should be fun none the less in my heavy *** pig. If I cut 300 pounds out of it I could possibly be competitive.
#24
Man the RS class is taking off! When I am able to throw all the boost my turbo has at my car, I might foray into this class and see here I stand. I really don't see myself running faster than 5.7's-5.8's but it should be fun none the less in my heavy *** pig. If I cut 300 pounds out of it I could possibly be competitive.
#25
went through the under hood body harness tonight, got all the stuff I dont need out for the most part. Tucking the fuse boxes and harness under the driver fender will be next. I've got some pretty crafty ideas on how to do this, i'll probably make a separate thread for that. I'll get some pics up later, my camera is at my house right now. On another note, I sold my kooks setup so i have a decent chunk of change to get some more parts that i need. I got some rod bolts and an ls6 intake coming to me so those are knocked out. Next parts on the list is ABS delete kit, fuel pump and regulator. Trying to get most of that stuff wired up and plumbed while i have the engine out of the car, just makes it easier.
#26
10 Second Club
iTrader: (10)
The cars in the RS class here that are winning each event are running 5.50's consistently, hell there is a yellow 79 stang with a 4xx windsor and the RS legal nitrous jet that ran low 5.40's at 127 last event and they even tech'd the car 3 seperate times that event just to be sure it was legal each time.
#27
Havent really kept up with this thread but this is where I'm at currently
Just needs fluids and vacuum lines to be routed. And the abs delete kit to be installed/brakes bled. Not too worried about mounting the hood at the moment, that will be done when the car gets painted. Also just have to secure/tidy up some of the wiring harnesses. Been working on an initial tune for it as well.
Just needs fluids and vacuum lines to be routed. And the abs delete kit to be installed/brakes bled. Not too worried about mounting the hood at the moment, that will be done when the car gets painted. Also just have to secure/tidy up some of the wiring harnesses. Been working on an initial tune for it as well.