TH400 ratchet shifter or non rachet style best?
#1
Thread Starter
9 Second Club
iTrader: (2)
TH400 ratchet shifter or non rachet style best?
I need a shifter for basically a track only car. I have a th400 trans in the car. I see there are shifters like the B&M pro ratchet and then there is the style where you pull a lever to pull into 3rd gear like the B&M pro bandit. what are the pros/cons of the 2 types? what will work best for a race car?
#2
11 Second Club
iTrader: (16)
Joined: Feb 2006
Posts: 1,865
Likes: 0
Received 0 Likes
on
0 Posts
From: Cape Girardeau, MO
I went from a b&m mega shifter to a hurst pistol grip quarter stick. I found myself needing to adjust the Rachet shifter every 6mo or so, plus having to go through the gears to make sure I was in the gear I wanted. I love the quarter stick, the feel of it is much better then the Rachet shifter, and I always know what gear I'm in with just the feel of it(keeps from 2nd gear launches lol) but honestly it will come down to personal preference.
#4
10 Second Club
iTrader: (14)
I like the pro ratchet I have, it fits in the stock console with minimal modification, and thats only to cut a small slot for the reverse lockout saftey lever. I'm not too fond of the quarter stick/ pro stick because you have to use a lever to shift some gears. As far as not knowing what gear you're in, well i dont think its too hard considering its only a 3 speed. I dont imagine you have any problems driving an M6 and knowing what gear you're in, should be the same concept.
#5
11 Second Club
iTrader: (16)
Joined: Feb 2006
Posts: 1,865
Likes: 0
Received 0 Likes
on
0 Posts
From: Cape Girardeau, MO
You'd be suprised, plus with a m6, the shifter is still in a specific location. I've left mine in 2nd....ol pg launch lol. You only have to pull the lever for 3rd. Keeps you from grabbing 3rd and goig through 2nd. Prolly really useful on cars that are actually fast....
#6
Launching!
iTrader: (35)
Joined: Oct 2006
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
From: Chandler, AZ
I personally prefer the Pro Stick, Quarter Stick, Precision, etc, BUT with a RMVB only. Pull the handle for 2nd, pull the lever for 3rd and you know what gear it's in by just putting your hand down on the shifter. The lever shift isn't nearly as fluid on a FMVB (to me). I've had and witnessed cars pull out of the burnout and not get a full ratchet back to first and start in 2nd. Of course its all driver error, but...
Trending Topics
#8
Is it reverse pattern? Be sure you get the right shifter or one that works for both. I have a Hurst Quarter Stick. Not very happy with it. You should not have to think about squeezing levers while your racing. My 10.30's Mustang has a ratchet shifter and a solenoid that shifts it automatically. Works like a champ. Set the shift point RPM and it does the rest. Same for my 73 Camaro. All you do is keep it in the lane.
Al 95 Z28
Al 95 Z28
#10
9 Second Club
iTrader: (31)
If/when you want the best, get this:
http://www.precisionperformance.com/
#11
Thread Starter
9 Second Club
iTrader: (2)
I have a TCI outlaw in my car.
If/when you want the best, get this:
http://www.precisionperformance.com/
If/when you want the best, get this:
http://www.precisionperformance.com/
do you have any pics of your tci outlaw in your car?
#15
TCI outlaw with a reverse valve body. Pull back on the handle to get 2nd. Then pull back on the lever to get 3rd. This is the only shifter I would run. No pics, but it's through an auto console. Just cut out the old shifter plate, so the top part of the tci cover sticks through. Use there side button mod to activate the trans break,rpm launch control, and nitrous. Don't ask me about wiring it because I had it done
Only draw back, if you call it that, is you don't want to hang on to the shifter on a hard launch, because the force of the launch makes me pull back on the shifter premature. But that could be me. I bet the same could be said for a ratchet. Not sure how a shifter like this will work on a forward valve body. Seems like I've heard some people say they have gone into nuteral, when dot being deliberate with the trigger squeeze.
Only draw back, if you call it that, is you don't want to hang on to the shifter on a hard launch, because the force of the launch makes me pull back on the shifter premature. But that could be me. I bet the same could be said for a ratchet. Not sure how a shifter like this will work on a forward valve body. Seems like I've heard some people say they have gone into nuteral, when dot being deliberate with the trigger squeeze.
#16
#18
Launching!
iTrader: (35)
Joined: Oct 2006
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
From: Chandler, AZ
Lever in front, handle in back...
Roger 98 TA RMVB that I have to shift as well
#19
Launching!
iTrader: (35)
Joined: Oct 2006
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
From: Chandler, AZ
And yes, you can accidentally click 2nd if your hand is on the shifter and your car leaves decently. With the gate shifter, you don't have to pull through the spring that the ratchet has to re-index the shifter, so it requires less effort... That's why my t-brake button isn't on the shifter.
#20
Yea, I've thought about moving mine to the steering wheel for that reason. With the outlaw, quarter stick, and other gated shifters of this type, it is almost like having lightning rods. But it works good, how ever you explain it