BAKED

iTrader: (14)

I was wanting to see if any of you guys with parachutes have any pics of your support on the car without the bumper on. I have a pretty good idea of how I'm going to build mine, I just wanted to see what some others have done.

If you've got pics post em up, even if they aren't on 4th gen's I'd like to see them.

Thanks!

Fireball

iTrader: (21)

I have the wolfe kit. I'm changing it around to accomodate dual chutes this year though

Here is the wolfe setup:
http://www.wolferacecraft.com/instal.../fbodpara.aspx

LS1SpeedAddict

iTrader: (9)

does it come out in the middle where the license plate goes like in the pics? What wing length is yours?

Fireball

iTrader: (21)

On a TA...it comes out at the top of the plate.



I forget what wing length I ordered from Kurt (its been months ago )

twin turbo 383 lt1

who wheelie bar are you running

Fireball

iTrader: (21)

just a bickel weld up kit that we put together.

twin turbo 383 lt1

i have a 94 camaro with a 9 inch. do you still have the panhead bar in and what did you have to do to get it in there got any pics thanks

Camaro396

iTrader: (14)

SpaZMaN

iTrader: (5)

I like that setup camaro 396, any pics of everything back on?

z28racerlt1

I just did a set of S & W Stocker wheelie bars on my car. We had to get rid of the sump in the back and the upper panhard bar. They didn't allow for any adjustment up or down on the bars. I get alot now. These are spring loaded and 48" long bars. They were definitely not the weld brackets on and bolt together like I thought they were going to be. Sorry for the dirty car. This car gets ALOT of laps put on it.

Ken

Camaro396

iTrader: (14)

Sorry I don't have a picture with everything back on, but it's a very nice setup. Chute mount comes out through where the lisc plate area is.

ninetres

iTrader: (35)

Any kits for a camaro that do not interfere with the license plate......for the cruise nights???

Fireball

iTrader: (21)

my panhard fit just fine. like said earlier...lost the upper panhard support and had to remove the t-top well.

jmill96Z

iTrader: (3)

Is this the wolfe mount, or did you fab it up?

Also, does anyone know if Burkhart ever came out with their rear bumper support/chute mount? I really need one that is removable.

trigger1

iTrader: (28)

That's my old car, and the mount was made by burkhart.

parts pro

Has anyone had a older style Simpson parachute deploy by bumping the cable at rear of the car or premature deployment.

n2o4myfix

iTrader: (1)

Not a 4th gen. but mines just home maid, it has a pin set up to take it off for when I drive it on the street. There's a bar just under the tail lights that runs across the back, the bumper mounts to it, its also tied into the cage.