pyro719

iTrader: (5)

Ok so I recently bought a 94 trans am m6 with an lt4 hot cam kit in it. I bought the car and the next day got a nitrous kit for it. Im wanting to spray a 150 off a nitrous outlet plate kit and eventually step it up to a 200. Should I even attempt to spray it out of the hole on 3.23 gears? Currently running a 26" hoosier slick.

robsquikz28

iTrader: (246)

I did mine for over 100 passes. revved it up to 1200 to preload the suspension and away I went. 1.47 short times all day long

pyro719

iTrader: (5)

Damn thats a pretty badass 60ft on 323s abd a 6 speed!

T6Rocket

How did you pre-load the suspension with a manual transmission?

Al

Mighty Whitey

Why does your 94 6spd car have 3.23's?

pyro719

iTrader: (5)

Because it was an auto car converted to 6 speed

c0ncEpT

iTrader: (4)

I'd be afraid it would bog and back fire if it ever dead hooked. Never tried it so I don't really have any input. Good luck.

robsquikz28

iTrader: (246)

left ft on clutch and brake. rt foot gave it gas and away it went

SHDY 5.7

As Rob said, have at it, just don't be upset if the factory 10blt goes boom. I've known an lt1 or 2 to run 200 shots safely.