Cars on trailers
Lol any problems getting it strapped down? Thats all I can afford really lol I dont have the cash to buy a new one anytime soon, unless I find a good deal on a used one around here.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
kaufmantrailers.com/ ??? 
What do you guys think of this?
http://www.kaufmantrailers.com/heavy...ASIC-p493.html
I would think the open bottom would be extremely helpful if you ever needed to really get under the car at the track for something..
Dovetail= 52"
Floor= 22" diamond plate runners
Ramps= 50 in. x 20 in. smooth surface rear slide in ramps, with 2 in. x 2 in. x 1/4 in. angle runners
Deck length= 16' (11 ft. 8 in. flat + 52 in. dovetail)
Deck height= 20" (would this clear doors?)
Looks like a pretty damn good deal IMO..
http://www.kaufmantrailers.com/heavy...ASIC-p493.html
I would think the open bottom would be extremely helpful if you ever needed to really get under the car at the track for something..
Dovetail= 52"
Floor= 22" diamond plate runners
Ramps= 50 in. x 20 in. smooth surface rear slide in ramps, with 2 in. x 2 in. x 1/4 in. angle runners
Deck length= 16' (11 ft. 8 in. flat + 52 in. dovetail)
Deck height= 20" (would this clear doors?)
Looks like a pretty damn good deal IMO..
appalachian trailers is also someone to try......They're a few more bucks but they are a full deck, which will make it useful for things other than just cars.......If you need under the car for something, you can park the car part-way on the ramps and crawl under it.
10 Second Club
Joined: Aug 2010
Posts: 4,467
Likes: 193
From: Harford Co. Maryland
I thought about an open center but to use it for other things could be an issue ? I also looked at being able to work off it, but it's at a odd heigth and the cross bars always seem to be in the way.
Thanks. This trailer was $7300 with the tool box, winch, aluminum wheels and l.e.d. lights. But its got a 20' deck and movable tie downs which is real handy. It weighs 1400lbs, that's pretty light for a trailer that size. I needed a aluminum trailer so I can pull it behind my truck camper to keep weight down as much as possible. I had a Featherlight(I think there is a pic in this thread) and they're a nice trailer, but not as versatile as this Triton.
Here is a pic of mine. I found it on CL for $1200. It has an open center, when I got it the guy had bolt 2x10s to the center section for other purposes. I still use them when I need to move something other than my car. It is a 18' with 2' dove w/dual electric brakes, it only has 4' ramps.
The short ramps make it a pain in the *** to load. I usually back the rear tires of the truck onto some ramps and the car pulls right up. I have since welded a receiver hitch to the front to mount my winch. I have also added a tongue box to store the winch in.
The short ramps make it a pain in the *** to load. I usually back the rear tires of the truck onto some ramps and the car pulls right up. I have since welded a receiver hitch to the front to mount my winch. I have also added a tongue box to store the winch in.
Here is a pic of mine. I found it on CL for $1200. It has an open center, when I got it the guy had bolt 2x10s to the center section for other purposes. I still use them when I need to move something other than my car. It is a 18' with 2' dove w/dual electric brakes, it only has 4' ramps.
The short ramps make it a pain in the *** to load. I usually back the rear tires of the truck onto some ramps and the car pulls right up. I have since welded a receiver hitch to the front to mount my winch. I have also added a tongue box to store the winch in.
The short ramps make it a pain in the *** to load. I usually back the rear tires of the truck onto some ramps and the car pulls right up. I have since welded a receiver hitch to the front to mount my winch. I have also added a tongue box to store the winch in.
