10s at ATCO last night.
Thread Starter
Banned
Joined: Nov 2001
Posts: 511
Likes: 0
From: NJ
10s at ATCO last night. CARTEK Dave's new time for a H/C/I on a 3500# 99 A4 TA was 10.988 @ 122.01 with a 1.443 60'.
C5_PIG Mark's M6 C5 with H/C/I 3380# race weight went 11.197 @ 123.23 with a 1.598 60' and 11.332 @ 124.51 with a 1.654 60'.
ROBSVETTE Robert, A4 C5 with H/C/I Stock weight (about 3550) went 11.7 @ 119.
Julio
C5_PIG Mark's M6 C5 with H/C/I 3380# race weight went 11.197 @ 123.23 with a 1.598 60' and 11.332 @ 124.51 with a 1.654 60'.
ROBSVETTE Robert, A4 C5 with H/C/I Stock weight (about 3550) went 11.7 @ 119.
Julio
Re: 10s at ATCO last night. congrats. <img src="images/icons/smile.gif" border="0"> good mph for a 3500# car.
Can you give a full rundown of the setup?
cam specs? converter? 4l60? gear ratio? etc..
once again great job!
later,
Steve
Can you give a full rundown of the setup?
cam specs? converter? 4l60? gear ratio? etc..
once again great job!
later,
Steve
TECH Enthusiast
Joined: Nov 2001
Posts: 699
Likes: 0
From: Maryland
Re: 10s at ATCO last night. Julio, congrats on 10's!! You guys knew you were close. Did you guys actually weigh the car or is 3500 an estimate?
Dave
[ November 14, 2001: Message edited by: ONYXSS ]</p>
Dave
[ November 14, 2001: Message edited by: ONYXSS ]</p>
Re: 10s at ATCO last night. Congrats on the 10's N/A! That's quite a feat!
[quote]Originally posted by Tekhombre:
<strong> ROBSVETTE Robert, A4 C5 with H/C/I Stock weight (about 3550) went 11.7 @ 119.
Julio</strong><hr></blockquote>
Are you saying that his C5 weighs MORE than my SS? <img src="images/icons/confused.gif" border="0">
[quote]Originally posted by Tekhombre:
<strong> ROBSVETTE Robert, A4 C5 with H/C/I Stock weight (about 3550) went 11.7 @ 119.
Julio</strong><hr></blockquote>
Are you saying that his C5 weighs MORE than my SS? <img src="images/icons/confused.gif" border="0">
__________________
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
Banned
Joined: Nov 2001
Posts: 511
Likes: 0
From: NJ
Re: 10s at ATCO last night. Terry, the TA has stock cubes 346, our stage 2 LS1 heads (10.7/1 CR), our 224-228 cam, LS6 intake, air lid, UD pulley, headers, Borla cat-back, FLP trans, PI Vig. 4400 converter, 4.10s, Stealth torque arm, ET streets and skinnies, 6 point RB with swing outs, LS1-edit tuned by yours truly.
Julio.
Julio.
Re: 10s at ATCO last night. Thanks, looks good! With that cam are you shifting around 6700rpm? Also I understand you guys port LS6 manifolds? Care to share what you do for us cheap do-it-yourselfers out there?
Re: 10s at ATCO last night. Holy ****!!!!!!!!!
Julio, we need to talk. I'm looking to fix my piston ring problem soon. I want to go with a new short block, keep my heads and cam and probably spray! I think my heads need some fixin. Something tells me when the shop fixed them last year when I did the 3-2 mis-shift they screwed something up.
Julio, we need to talk. I'm looking to fix my piston ring problem soon. I want to go with a new short block, keep my heads and cam and probably spray! I think my heads need some fixin. Something tells me when the shop fixed them last year when I did the 3-2 mis-shift they screwed something up.
TECH Apprentice
Joined: Nov 2001
Posts: 317
Likes: 0
From: Shippensburg, PA
Re: 10s at ATCO last night. Awesome job on the 10 second run!!! I bet you and Dave are STILL smilin' <img src="images/icons/grin.gif" border="0"> And Mark is SO close... would he be the only h/c stock displacement C5 running 10's?
Thread Starter
Banned
Joined: Nov 2001
Posts: 511
Likes: 0
From: NJ
Re: 10s at ATCO last night. Terry, the shift points are at 6700.
Big Mike, contact me at the shop when you get a chance 908-317-4496.
Mike S., we were running 11.0s at the end of the night but when we first got there Dave was running 11.1s 11.2s, we knew there was a problem because he runs 11.1-11.2 in warmer weather. We found a lot of leaf bits in the MAF screen and we blew them out, the very next run he ran 11.0s and in the last run 10.98.
WS6 TransAm Girl, Dave wouldn't shut up the whole way home. <img src="images/icons/grin.gif" border="0">
Big Mike, contact me at the shop when you get a chance 908-317-4496.
Mike S., we were running 11.0s at the end of the night but when we first got there Dave was running 11.1s 11.2s, we knew there was a problem because he runs 11.1-11.2 in warmer weather. We found a lot of leaf bits in the MAF screen and we blew them out, the very next run he ran 11.0s and in the last run 10.98.
WS6 TransAm Girl, Dave wouldn't shut up the whole way home. <img src="images/icons/grin.gif" border="0">
Thread Starter
Banned
Joined: Nov 2001
Posts: 511
Likes: 0
From: NJ
Re: 10s at ATCO last night. Jay, that look's more like... Hummm Any way
This look's more like Dave ---> <img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
<img src="images/icons/grin.gif" border="0">
This look's more like Dave ---> <img src="graemlins/burnout.gif" border="0" alt="[Burnout]" />
<img src="images/icons/grin.gif" border="0">
Thread Starter
Banned
Joined: Nov 2001
Posts: 511
Likes: 0
From: NJ
Re: 10s at ATCO last night. Thank you guys.
ONYXSS, the car was weigh with corner scales and with an empty gas tank it's at 3,480# then add a few gallons of fuel and we are at about 3,500# with a driver. He still has a mild steel roll bar with swing outs a complete Borla cat-back and it's a TA not a Camaro.
Trevor D, in this case yes, Rob's C5 is at stock weight for an A4 coupe and we have lightened Dave's car to the 3500# mark. We are going to take more weight out of Dave's TA in order to make him more competitive.
Thanks again, Julio.
ONYXSS, the car was weigh with corner scales and with an empty gas tank it's at 3,480# then add a few gallons of fuel and we are at about 3,500# with a driver. He still has a mild steel roll bar with swing outs a complete Borla cat-back and it's a TA not a Camaro.
Trevor D, in this case yes, Rob's C5 is at stock weight for an A4 coupe and we have lightened Dave's car to the 3500# mark. We are going to take more weight out of Dave's TA in order to make him more competitive.
Thanks again, Julio.
Launching!
Joined: Nov 2001
Posts: 236
Likes: 0
From: Memphis, TN
Re: 10s at ATCO last night. [quote]Originally posted by Tekhombre:
<strong>CARTEK Dave's new time for a H/C/I on a 3500# 99 A4 TA was 10.988 @ 122.01 with a 1.443 60'.
C5_PIG Mark's M6 C5 with H/C/I 3380# race weight went 11.197 @ 123.23 with a 1.598 60' and 11.332 @ 124.51 with a 1.654 60'.
ROBSVETTE Robert, A4 C5 with H/C/I Stock weight (about 3550) went 11.7 @ 119.
Julio</strong><hr></blockquote>
Julio -
very nice <img src="images/icons/grin.gif" border="0"> ....now you're making me want to go out again! anyway, did you change anything since our 'track day'? or was it just better air?
- Brian
[ November 15, 2001: Message edited by: horsepower ]</p>
<strong>CARTEK Dave's new time for a H/C/I on a 3500# 99 A4 TA was 10.988 @ 122.01 with a 1.443 60'.
C5_PIG Mark's M6 C5 with H/C/I 3380# race weight went 11.197 @ 123.23 with a 1.598 60' and 11.332 @ 124.51 with a 1.654 60'.
ROBSVETTE Robert, A4 C5 with H/C/I Stock weight (about 3550) went 11.7 @ 119.
Julio</strong><hr></blockquote>
Julio -
very nice <img src="images/icons/grin.gif" border="0"> ....now you're making me want to go out again! anyway, did you change anything since our 'track day'? or was it just better air?
- Brian
[ November 15, 2001: Message edited by: horsepower ]</p>
Thread Starter
Banned
Joined: Nov 2001
Posts: 511
Likes: 0
From: NJ
Re: 10s at ATCO last night. Hey Brian, nice to see you are also in this forum.
The weather was the biggest factor, when we got to ATCO that night it was cold but Dave was running 11.1-11.2s, he had leaf bits on the MAF screen, after blowing them out he started running 11.0s then 10s on the last run. The only difference from when we ran with you is a new set of gears, the old set was howling.
Julio
The weather was the biggest factor, when we got to ATCO that night it was cold but Dave was running 11.1-11.2s, he had leaf bits on the MAF screen, after blowing them out he started running 11.0s then 10s on the last run. The only difference from when we ran with you is a new set of gears, the old set was howling.
Julio