narrowed rear and the old ARE car...
07-28-2004, 10:42 AM
#41
TECH Junkie
iTrader: (9)
Join Date: Jun 2003
Location: Winter Garden, Florida
Posts: 3,428
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DERTY
Billingsley carries a spring that can help lower the car. I'll let you know how well it launchers here very soon.
07-28-2004, 09:55 PM
#42
TECH Junkie
Join Date: Nov 2001
Location: Melbourne, FL
Posts: 3,987
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by FEAR THE LS1
Also its good to see your still alive George, I modeled my car after yours. 
Lee
Lee
As far as shortening the axles, Moser axles usually have quite a bit of extra spline on them, so it's possible to cut them down yourself with a chop saw, and use a triangular file to clean up the ends of the splines... Depends on your particular setup, how much you're going to need to shorten the axle, and how much of the axle is already splined...
08-02-2004, 10:48 PM
#43
TECH Senior Member
Join Date: Nov 2001
Posts: 10,341
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DERTY
The axles are the same ones you currently have. They just shorten them and extend the splines.
So to narrow and do everything drive in and drive out it is about 300 bucks?
anyone know of shops that'll do this in Ontario?
