Calypso Fox Street car Quest for 6's Hydraulic 388ci GTR98
#301
Now Im jacked up because I have 3 suspsension baselines plotted out in case we need it for both my boy tim and I. but before I try to tame the wheelie. I do what any logical guy would and I turn it the **** up.
The following users liked this post:
C5_Pete (05-24-2021)
#302
Do a couple more .5's a couple more aborted passes. I wait for the sun to start fading out and blast one with a quick stab of the gas when it starts to wheelie to ensure it dosent and bang. 4.46@167 on 32 pounds! all on a relatively shitty 60. even compared to last year.
The following users liked this post:
C5_Pete (05-24-2021)
The following users liked this post:
C5_Pete (05-24-2021)
#304
I end the night off so happy i went and ate good. partied a bit. celebrated. Best feeling ever. First time out I run better than my entire past year. BUT it aint over yet. I have two more days!
So next day. First pass. I turn it up. add some nose weight. see what happens right?
YOU READ THAT RIGHT. 170 MF MPH on 36 psi of boost! Id really like to know if anyone knows of any other 1/4 cars on ethanol going 170 mph!
Damn Im over the moon now. HOLY ****.
So next day. First pass. I turn it up. add some nose weight. see what happens right?
YOU READ THAT RIGHT. 170 MF MPH on 36 psi of boost! Id really like to know if anyone knows of any other 1/4 cars on ethanol going 170 mph!
Damn Im over the moon now. HOLY ****.
The following 2 users liked this post by BlackSS4thgen:
C5_Pete (05-24-2021), wretched73 (05-24-2021)
The following 2 users liked this post by BlackSS4thgen:
C5_Pete (05-24-2021), wretched73 (05-24-2021)
#308
Mike knows his cylinder heads!!! People always say BS on 4.4x's with a hydraulic roller and a set of his heads. I know of 2 other rides that have been in the 170's with a VERY similar combination. 1 went 174 a few weeks ago. I am wondering if I could get all that good **** stuff into the front of a 62 vette? I need to do some measurements and see. Can I pm you for some total width and length off the front?
I have a cowl hood for it so it isn't so "race" looking. I may just do a big single with the BBC that's in it. Would you be interested in doing something over the winter?
I have a cowl hood for it so it isn't so "race" looking. I may just do a big single with the BBC that's in it. Would you be interested in doing something over the winter?
The following users liked this post:
rryan5429 (05-24-2021)
#309
I end the night off so happy i went and ate good. partied a bit. celebrated. Best feeling ever. First time out I run better than my entire past year. BUT it aint over yet. I have two more days!
So next day. First pass. I turn it up. add some nose weight. see what happens right?
YOU READ THAT RIGHT. 170 MF MPH on 36 psi of boost! Id really like to know if anyone knows of any other 1/4 cars on ethanol going 170 mph!
Damn Im over the moon now. HOLY ****.
So next day. First pass. I turn it up. add some nose weight. see what happens right?
YOU READ THAT RIGHT. 170 MF MPH on 36 psi of boost! Id really like to know if anyone knows of any other 1/4 cars on ethanol going 170 mph!
Damn Im over the moon now. HOLY ****.
#310
Big Congrats to you Kenny and a job well done!!! I don't know you personally, but I believe you are very deserving of a successful track outing, great dinner & drinks to wrap the night up. So congrats to you Kenny. Keep us updated over the next couple of days, I have a feeling a KILLER pass is on the way!
Yanking timing itll really hover and ride the converter opposed to flash in low gear but there is infinite amount of tuning and power management to learn and apply from here. Super successful first weekend out. no complaints. personal bests everywhere on the slip other than the 60. super focused direction for the future. o just need more time now!
#312
#313
Unfortunately the weekend ended. I didnt end up getting it completely sorted. towards the end of the weekend we enabled the gyrocope and used pitch angle of the car as wheelie control. IT works super awesome but damn does it slow it down.
Yanking timing itll really hover and ride the converter opposed to flash in low gear but there is infinite amount of tuning and power management to learn and apply from here. Super successful first weekend out. no complaints. personal bests everywhere on the slip other than the 60. super focused direction for the future. o just need more time now!
Yanking timing itll really hover and ride the converter opposed to flash in low gear but there is infinite amount of tuning and power management to learn and apply from here. Super successful first weekend out. no complaints. personal bests everywhere on the slip other than the 60. super focused direction for the future. o just need more time now!
On that 4.46 pass, did you have a deep pre-stage causing the deep stage or was the bump too aggressive? You have the ability to adjust bump aggression?
#314
Still an excellent report in my book for sure. I will be here to watch your journey and I appreciate the content you post for us.
On that 4.46 pass, did you have a deep pre-stage causing the deep stage or was the bump too aggressive? You have the ability to adjust bump aggression?
On that 4.46 pass, did you have a deep pre-stage causing the deep stage or was the bump too aggressive? You have the ability to adjust bump aggression?
That was the first time I used the bump and it was aggressive. I have it tamed down now. Ill try to post more vidoes in a single video soon.
The following users liked this post:
biketopia (06-01-2021)
#318
Originally Posted by BlackSS4thgen
Super stoked. even if i left it alone its going bottom 6.8's peddling down low lol.
Exceeded my expectations. 6.6-6.7 by fall shouldnt be an issue. i guess we just play the weather game during the summer now.
Exceeded my expectations. 6.6-6.7 by fall shouldnt be an issue. i guess we just play the weather game during the summer now.
Do you still/ever talk to the owner of your f body?
I'm sure curious on how that went. I haven't checked that thread in quite some time....I just remember there being some hanky panky on paying you, and holding the car, deposits and blah blah blah. I bet you're just stoked to finally be into this thing and slaying like you are!! I can't imagine what you do in a chassis car down the road hahaha wtf.....watch out, world!!!
#319
My hell Kenny lol you're always out there crushin it..! KEEP IT UP!!!
Do you still/ever talk to the owner of your f body?
I'm sure curious on how that went. I haven't checked that thread in quite some time....I just remember there being some hanky panky on paying you, and holding the car, deposits and blah blah blah. I bet you're just stoked to finally be into this thing and slaying like you are!! I can't imagine what you do in a chassis car down the road hahaha wtf.....watch out, world!!!
Do you still/ever talk to the owner of your f body?
I'm sure curious on how that went. I haven't checked that thread in quite some time....I just remember there being some hanky panky on paying you, and holding the car, deposits and blah blah blah. I bet you're just stoked to finally be into this thing and slaying like you are!! I can't imagine what you do in a chassis car down the road hahaha wtf.....watch out, world!!!
I usually feel for people but that guy was something else.
#320
Guys I did it! Blazing hot. 91-92 today. 130 degree track temps again. so it was touchy. Spun a few but laid a few down. Only regret was pulling the chute early on my first pass as it was likely the best. son of a bitch did 187 at the 1,000 foot!