Wolfe roll cage experts in here, please!
#1
TECH Resident
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Houston, TX
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Here's my situation. I'm gonna need a roll cage. Last time I ran at HRP, I ran one 11.87 and they gave me a stern warning. Next pass, I clicked off an 11.69 (which, at the time, was the new 6-speed N/A bolt-on record), and they gave me the boot. Wouldn't even give me my timeslip. How gay. I had to get it from my opponent, who was gracious enough to let me have it. So basically what I need to know is what is the cheapest way (including price of the cage, AND price of install) to get by tech at HRP and/or the Motorplex in Ennis, and still maintain some respectable level of safety?
* Chromoly/mild steel?
* Weld-in/bolt-in?
* 4-pt./6-pt./10-pt.?
My priorities are as follows:
1) Price
2) Safety
3) Weight
Thanks!!!!!!!!! <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
<small>[ October 16, 2002, 07:12 AM: Message edited by: RAGEman ]</small>
* Chromoly/mild steel?
* Weld-in/bolt-in?
* 4-pt./6-pt./10-pt.?
My priorities are as follows:
1) Price
2) Safety
3) Weight
Thanks!!!!!!!!! <img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" />
<small>[ October 16, 2002, 07:12 AM: Message edited by: RAGEman ]</small>
#2
"The Drag Racing Director"
iTrader: (10)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Alan,
Give Madman a call #281.449.8833 He can and will hook you up. <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
<small>[ October 16, 2002, 08:06 AM: Message edited by: Coach 02 M6 Z/28 ]</small>
Give Madman a call #281.449.8833 He can and will hook you up. <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
<small>[ October 16, 2002, 08:06 AM: Message edited by: Coach 02 M6 Z/28 ]</small>
#3
SSU Moderator
Join Date: Nov 2001
Location: Austin, TX
Posts: 4,857
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
price? install? bolt-in 6-pt (or 5 if you can) w/ some padding to cover the bolts. cheap = mild steel. and light = moly....its up to you.
#5
TECH Fanatic
iTrader: (1)
Join Date: Nov 2001
Location: Long Island
Posts: 1,543
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have the Wolf 5 point chromoly weld in cage with the swing out on the drivers side. Before I had it welded in it weight in at 52 pounds . I have some pic's here after it was intalled .. I just threw the carpet back in for now. I will be getting a light weight one this winter <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" />
http://12.42.47.6/phil/petecage1.jpg http://12.42.47.6/phil/petecage2.jpg http://12.42.47.6/phil/petecage3.jpg http://12.42.47.6/phil/petecage4.jpg
<small>[ October 16, 2002, 09:41 AM: Message edited by: bspz28 ]</small>
<img border="0" alt="[Burnout]" title="" src="graemlins/burnout.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" alt="[Camaro]" title="" src="graemlins/camaro.gif" />
http://12.42.47.6/phil/petecage1.jpg http://12.42.47.6/phil/petecage2.jpg http://12.42.47.6/phil/petecage3.jpg http://12.42.47.6/phil/petecage4.jpg
<small>[ October 16, 2002, 09:41 AM: Message edited by: bspz28 ]</small>
#6
TECH Resident
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Houston, TX
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey, man...forgive the ignorant question, but is the 5-pt. legal and how did you get it? I was glancing at Tom Byrne's website, and he only sells 4-pt., 6-pt., and 10-pt. That install looks clean!
#7
TECH Fanatic
iTrader: (1)
Join Date: Nov 2001
Location: Long Island
Posts: 1,543
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
yes you can call up Wolf and tell them you only want a 5 point .. I belive a 5 point is good till 10.0 . there is no need for the passenger side bar .
Trending Topics
#8
TECH Resident
Join Date: Nov 2001
Location: Knoxville, TN
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
5 pt is legal. The bar that is left off is the passenger-side bar.
There are trade offs when you have to consider weight, safety, and price.
The lightest bars are welded-in chrome-moly units. They are also the most expensive.
The safests bars are generally welded (either mild steel or chrom-moly). However, they are more expensive than the bolt-in variety, and often are not the lightest.
The cheapest bars are the bolt-in mild steel bars. However, they are probably the least safe and the heaviest.
See the problem? <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
If I were in your shoes (and in many ways, I am), I would get a professionally-done custom chrome-moly bar with swing-out bar. This is probably the most expensive route, but it will be safe, useful, and potentially the lightest option (you guys like light, right?).
If you want to really nuts, and really want to save weight, and don't care what it looks like, you can actually have a small 5 pt bar made that essentially just loops around the drivers seat (and has the mandatory sidebar, of course). It won't be cheap, but would probably cut the weight penalty nearly in half. I've seen NHRA Stock Eliminator cars do this - mainly to save weight. Looks silly...but hey, whatever works. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Or you could just stick to IHRA tracks and go 11.50 without worrying about it. <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
There are trade offs when you have to consider weight, safety, and price.
The lightest bars are welded-in chrome-moly units. They are also the most expensive.
The safests bars are generally welded (either mild steel or chrom-moly). However, they are more expensive than the bolt-in variety, and often are not the lightest.
The cheapest bars are the bolt-in mild steel bars. However, they are probably the least safe and the heaviest.
See the problem? <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
If I were in your shoes (and in many ways, I am), I would get a professionally-done custom chrome-moly bar with swing-out bar. This is probably the most expensive route, but it will be safe, useful, and potentially the lightest option (you guys like light, right?).
If you want to really nuts, and really want to save weight, and don't care what it looks like, you can actually have a small 5 pt bar made that essentially just loops around the drivers seat (and has the mandatory sidebar, of course). It won't be cheap, but would probably cut the weight penalty nearly in half. I've seen NHRA Stock Eliminator cars do this - mainly to save weight. Looks silly...but hey, whatever works. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
Or you could just stick to IHRA tracks and go 11.50 without worrying about it. <img border="0" alt="[Fluffy]" title="" src="graemlins/fluffy.gif" />
#9
TECH Resident
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Houston, TX
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Thanks, fellas!!!!!
Bob, I plan on running slightly faster than 11.50. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
<small>[ October 16, 2002, 11:40 AM: Message edited by: RAGEman ]</small>
Bob, I plan on running slightly faster than 11.50. <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
<small>[ October 16, 2002, 11:40 AM: Message edited by: RAGEman ]</small>
#11
FormerVendor
iTrader: (3)
Join Date: Jan 2002
Location: Ft. Worth, TX
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yes we can do 5-points in addition to our 6-points and 4-points.
As far as wieight. The 4130 Cromoly will be about 20lbs lighter than the Mild Steel, but will cost more intially and for install.
If you know someone that can weld. The least expensive way is a mild steel weld-in roll bar.
The kit Mild steel 6-point is $289.00, and an extra $100.00 if you want it jig notched. Our 4130 cromoly 6-point is $415.00 and $100.00 to jig notch it.
5-point mild steel is $244.00 for the kit, and $80.00 for jig notching. 4130 cromoly 5-point is $360.00 for the kit and $80.00 for jig notching.
The swing out door bars are $85.00 per door.
Since your in Waco, we can also install. We install our 6-point Mild-steel for $700.00.
Hope that helps
Dan
<small>[ October 16, 2002, 03:27 PM: Message edited by: Dan / Wolfe Race Craft ]</small>
As far as wieight. The 4130 Cromoly will be about 20lbs lighter than the Mild Steel, but will cost more intially and for install.
If you know someone that can weld. The least expensive way is a mild steel weld-in roll bar.
The kit Mild steel 6-point is $289.00, and an extra $100.00 if you want it jig notched. Our 4130 cromoly 6-point is $415.00 and $100.00 to jig notch it.
5-point mild steel is $244.00 for the kit, and $80.00 for jig notching. 4130 cromoly 5-point is $360.00 for the kit and $80.00 for jig notching.
The swing out door bars are $85.00 per door.
Since your in Waco, we can also install. We install our 6-point Mild-steel for $700.00.
Hope that helps
Dan
<small>[ October 16, 2002, 03:27 PM: Message edited by: Dan / Wolfe Race Craft ]</small>
#12
TECH Resident
Join Date: Nov 2001
Location: Knoxville, TN
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hi Dan...if I can intrude on my F-body brothers question for just a sec...do ya'll have a website with prices and such for Mustangs? I'm going to have to get a bar soon myself, and will likely go with a 5 pt cromoly kit.
Info greatly appreciated.
Bob
Info greatly appreciated.
Bob
#13
TECH Resident
Join Date: Nov 2001
Location: Knoxville, TN
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Duh...nevermind...I see it. I'll go back to sleep now. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
#14
TECH Resident
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Houston, TX
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Dan / Wolfe Race Craft:
<strong>Yes we can do 5-points in addition to our 6-points and 4-points.
As far as wieight. The 4130 Cromoly will be about 20lbs lighter than the Mild Steel, but will cost more intially and for install.
If you know someone that can weld. The least expensive way is a mild steel weld-in roll bar.
The kit Mild steel 6-point is $289.00, and an extra $100.00 if you want it jig notched. Our 4130 cromoly 6-point is $415.00 and $100.00 to jig notch it.
5-point mild steel is $244.00 for the kit, and $80.00 for jig notching. 4130 cromoly 5-point is $360.00 for the kit and $80.00 for jig notching.
The swing out door bars are $85.00 per door.
Since your in Waco, we can also install. We install our 6-point Mild-steel for $700.00.
Hope that helps
Dan</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Dan, does that $700 refer to the WELD-IN 6-pt. mild steel or the BOLT-IN one? And is that including the price of the cage, or is that JUST for install? Either way, what would the price be if my interior (carpet, panels, etc.) was already removed (we all know I'm an expert at that, of course)? Thanks!
FYI, Brian told me that in 2003, NHRA rules are changing to make 5-pt. cages illegal! Which means you'd have to find another door bar and weld it in if you already have a 5-pt.
[Edit: ATTN: BOB COSBY - dude, check out the above to see the rumor I heard from Brian at Madman about future NHRA rule changes]
<small>[ October 16, 2002, 03:36 PM: Message edited by: RAGEman ]</small>
<strong>Yes we can do 5-points in addition to our 6-points and 4-points.
As far as wieight. The 4130 Cromoly will be about 20lbs lighter than the Mild Steel, but will cost more intially and for install.
If you know someone that can weld. The least expensive way is a mild steel weld-in roll bar.
The kit Mild steel 6-point is $289.00, and an extra $100.00 if you want it jig notched. Our 4130 cromoly 6-point is $415.00 and $100.00 to jig notch it.
5-point mild steel is $244.00 for the kit, and $80.00 for jig notching. 4130 cromoly 5-point is $360.00 for the kit and $80.00 for jig notching.
The swing out door bars are $85.00 per door.
Since your in Waco, we can also install. We install our 6-point Mild-steel for $700.00.
Hope that helps
Dan</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Dan, does that $700 refer to the WELD-IN 6-pt. mild steel or the BOLT-IN one? And is that including the price of the cage, or is that JUST for install? Either way, what would the price be if my interior (carpet, panels, etc.) was already removed (we all know I'm an expert at that, of course)? Thanks!
FYI, Brian told me that in 2003, NHRA rules are changing to make 5-pt. cages illegal! Which means you'd have to find another door bar and weld it in if you already have a 5-pt.
[Edit: ATTN: BOB COSBY - dude, check out the above to see the rumor I heard from Brian at Madman about future NHRA rule changes]
<small>[ October 16, 2002, 03:36 PM: Message edited by: RAGEman ]</small>
#15
TECH Resident
Join Date: Nov 2001
Location: Knoxville, TN
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hmmm...haven't heard that. I'll certainly do some checking with my contacts.
In the meantime....VMP up here is IHRA, so I don't have to worry about bars and such till next years NMRA season. The air is looking to be about at sea level this Friday night, I've got the slicks mounted, and my car weight (as driven daily) is down to around 3240 lbs...might have to make the trip. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
In the meantime....VMP up here is IHRA, so I don't have to worry about bars and such till next years NMRA season. The air is looking to be about at sea level this Friday night, I've got the slicks mounted, and my car weight (as driven daily) is down to around 3240 lbs...might have to make the trip. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
#16
TECH Addict
iTrader: (7)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Cage is TOO MUCH WEIGHT! <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
I'll probably get one in the spring.lightest and strongest. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
I'll probably get one in the spring.lightest and strongest. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
#17
FormerVendor
iTrader: (3)
Join Date: Jan 2002
Location: Ft. Worth, TX
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The $700.00 is the cost or our 6-point weld-in roll bar installed and includes the roll bar as well.
We don't charge extra to remove the interior unless there is a stereo system or something different in the back. Or we are having to remove the dash in a Roll Cage situation.
Dan
We don't charge extra to remove the interior unless there is a stereo system or something different in the back. Or we are having to remove the dash in a Roll Cage situation.
Dan
#19
TECH Resident
Join Date: Nov 2001
Location: Knoxville, TN
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Will do! I always trailer to the track, so look for a ragged old Dodge van pulling a cheap trailer with a black Cobra aboard. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
#20
TECH Resident
Thread Starter
iTrader: (4)
Join Date: Nov 2001
Location: Houston, TX
Posts: 885
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Hey, Sean. Don't you want to run at HRP? I entertained the idea (for a short time) of just running a bunch of 1/8-mile passes until I had the feel of it down perfectly, then running the full 1/4 and getting 1 timeslip before they boot you. But, I finally decided, hey, it's not that expensive, and the added weight can be easily compensated for, and it's safe, so, you know. I'm about to call Brian @ Madman and see what he can do for me. Later.