Hoping for deep 10's
Thread Starter
Joined: Nov 2001
Posts: 10,060
Likes: 33
From: Canton, GA
Hoping for deep 10's I know many of you don't visit the nitrous forum, so here's some links that detail my current project:
www.cofba.org/users/reckless/dp_fuel.html
www.cofba.org/users/reckless/dp.html
<img src="http://www.cofba.org/users/reckless/nx22.jpg" alt=" - " />
Will stay with 150 shot for now on stock bottom end (with ARP rod bolts). Other mods are TEA Stage 2 heads and FMS F3 cam. Big challenge will be learning how to race with a 6-speed again <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
www.cofba.org/users/reckless/dp_fuel.html
www.cofba.org/users/reckless/dp.html
<img src="http://www.cofba.org/users/reckless/nx22.jpg" alt=" - " />
Will stay with 150 shot for now on stock bottom end (with ARP rod bolts). Other mods are TEA Stage 2 heads and FMS F3 cam. Big challenge will be learning how to race with a 6-speed again <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Re: Hoping for deep 10's Hey Todd, will this make you the fastest person on LS1.com?
<img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Sounds fun!
-Tony
<img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
Sounds fun!
-Tony
Thread Starter
Joined: Nov 2001
Posts: 10,060
Likes: 33
From: Canton, GA
Re: Hoping for deep 10's I know I am the fastest moderator over there, for what that is worth <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Todd
Todd
Re: Hoping for deep 10's Looks awesome! You planning on running at norwalk at all this year? It might be a good if race if spray a 200-225 shot <img border="0" alt="[evil]" title="" src="graemlins/gr_devil.gif" />
Thread Starter
Joined: Nov 2001
Posts: 10,060
Likes: 33
From: Canton, GA
Re: Hoping for deep 10's Pretty sure I'll be at Norwalk on May 9th. We have the track reserved for our club from 10-4. Very nice track.
I may spray over 150 at the N vs. S shootout if it'll win me some cash <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
I may spray over 150 at the N vs. S shootout if it'll win me some cash <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" />
TECH Junkie
Joined: Nov 2001
Posts: 3,987
Likes: 0
From: Melbourne, FL
Re: Hoping for deep 10's Todd, that setup looks BAD ***!!!!!
I wish I didn't have to see stuff like that, as it makes me want to put N2O on my car! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
I wish I didn't have to see stuff like that, as it makes me want to put N2O on my car! <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
SSU Moderator
Joined: Nov 2001
Posts: 4,857
Likes: 0
From: Austin, TX
Re: Hoping for deep 10's I thought they came with 4 sol's. one per rail seems a little small?
also, how difficult would have been to route the hard lines with more of a 90' angle and fit the rails more over the intake?
and isnt the output of the n2o noid on the physical bottom of the noid?
<small>[ February 04, 2003, 12:02 PM: Message edited by: Ryan ]</small>
also, how difficult would have been to route the hard lines with more of a 90' angle and fit the rails more over the intake?
and isnt the output of the n2o noid on the physical bottom of the noid?
<small>[ February 04, 2003, 12:02 PM: Message edited by: Ryan ]</small>
SSU Moderator
Joined: Nov 2001
Posts: 4,857
Likes: 0
From: Austin, TX
Re: Hoping for deep 10's I think I see what you mean.
Have you seen Tom K's setup? SO sweet. here...
<img src="http://community.webshots.com/image2/4/44/77/47744477pNxxzN_ph.jpg" alt=" - " />
<small>[ February 04, 2003, 03:50 PM: Message edited by: Ryan ]</small>
Have you seen Tom K's setup? SO sweet. here...
<img src="http://community.webshots.com/image2/4/44/77/47744477pNxxzN_ph.jpg" alt=" - " />
<small>[ February 04, 2003, 03:50 PM: Message edited by: Ryan ]</small>
Thread Starter
Joined: Nov 2001
Posts: 10,060
Likes: 33
From: Canton, GA
Re: Hoping for deep 10's The 80000efi kit comes with only two sol's. The 90000 kit comes with 4 sol's.
I thought about fitting the rails inside of the fuel rails, and it can prolly be dome without too much trouble. Shoot, I got so much tubing left over, I may try that later <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> The most difficult part of tube construction was the fact that the rails are perpendicular to the fuel rails, but the nozzles are at a slight angle. So a simple bend was not possible. It was a PITA for sure.
I actually thought about drilling and mounting the nozzles farther up in the runners to make things easy, but decided the system might hit too hard that way.
Todd
I thought about fitting the rails inside of the fuel rails, and it can prolly be dome without too much trouble. Shoot, I got so much tubing left over, I may try that later <img border="0" title="" alt="[Wink]" src="gr_images/icons/wink.gif" /> The most difficult part of tube construction was the fact that the rails are perpendicular to the fuel rails, but the nozzles are at a slight angle. So a simple bend was not possible. It was a PITA for sure.
I actually thought about drilling and mounting the nozzles farther up in the runners to make things easy, but decided the system might hit too hard that way.
Todd
Thread Starter
Joined: Nov 2001
Posts: 10,060
Likes: 33
From: Canton, GA
Re: Hoping for deep 10's Ryan...you are correct about the noid output. I will have to change it. The side port is for a purge outlet.
Todd
<small>[ February 04, 2003, 12:16 PM: Message edited by: Reckless ]</small>
Todd
<small>[ February 04, 2003, 12:16 PM: Message edited by: Reckless ]</small>
Thread Starter
Joined: Nov 2001
Posts: 10,060
Likes: 33
From: Canton, GA
Re: Hoping for deep 10's That's the first time I've seen that! That looks very nice. It should hit a lot harder with the nozzles that far up in the runners <img border="0" title="" alt="[Eek!]" src="gr_eek2.gif" />
I dont' think there is any good way to do the setup for jet changes though <img border="0" title="" alt="[Frown]" src="gr_sad.gif" /> Although his does look easier than mine to change jets.
Todd
I dont' think there is any good way to do the setup for jet changes though <img border="0" title="" alt="[Frown]" src="gr_sad.gif" /> Although his does look easier than mine to change jets.
Todd