Stenod Performance 25.2 / Outlaw 10.5 Update
#1
The Bull
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Started mounting the tubs and the seat in the car. Now we're moving on to some other finishing / tedious details. I'll keep posting some pictures as we get through the build up.
Last edited by DERTY; 11-15-2005 at 11:18 PM.
#3
The Bull
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
To be honest, much of the chassis has been done for a year. I took a small time out to work on some other things and would only mess with it from time to time. Now we are back at it again.
Unless you really try to build something like this, the appreciation for how much physical effort is involved can never be recognized by most. The amount of work that we've put into the car so far is far beyond what I had originally expected. To reproduce it, someone would have to spend quite a bit of time and effort. The separation between this type of car and something like what we used to run is pretty radical.
It's going to be very worth it when it's done! And we're having a ton of fun putting it together.
Unless you really try to build something like this, the appreciation for how much physical effort is involved can never be recognized by most. The amount of work that we've put into the car so far is far beyond what I had originally expected. To reproduce it, someone would have to spend quite a bit of time and effort. The separation between this type of car and something like what we used to run is pretty radical.
It's going to be very worth it when it's done! And we're having a ton of fun putting it together.
#4
8 Second Club
iTrader: (1)
Join Date: Nov 2001
Location: Friendswood
Posts: 10,121
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Derty the car looks freakin bad ***!!! My question is you say Outlaw 10.5 racing, which do you mean like ORSCA style racing, or do you all have local events?
If so do you plan on keeping the LS1, or move onto a SBC / BBC turbo setup. I remember seeing you say that you were going to keep a LS1, but I just cannot see a LS1 being able to compete with people like Tim Lynch, Todd Moyer, Steve Kirk, etc..
If so do you plan on keeping the LS1, or move onto a SBC / BBC turbo setup. I remember seeing you say that you were going to keep a LS1, but I just cannot see a LS1 being able to compete with people like Tim Lynch, Todd Moyer, Steve Kirk, etc..
#5
TECH Enthusiast
iTrader: (2)
Join Date: Feb 2002
Location: Elk Grove, IL
Posts: 610
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Car looks awesome man. Cant wait till i can afford to turn my Z into somethine very similar.
if i remember correctly the car is being setup for a local series @ milan. There are actually 4 ls1 powered cars being built for this series right now i believe (Harlan, Derty, Whitey, Roofer Dave)
if i remember correctly the car is being setup for a local series @ milan. There are actually 4 ls1 powered cars being built for this series right now i believe (Harlan, Derty, Whitey, Roofer Dave)
#6
The Bull
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Right now it's being built for any 10.5 class (not true 10.5, but the 10.5W type classes like Super Street). The idea is not to be the fastest in the class, but the most consistent. It's a whole new ballgame with this setup so we're going to get our feet wet. After that we'll see what we can learn. Like Bill said, the major focus this year is with Milan. We may hit a race with Pro or the NSCA as well since there have been some major rule changes in Super Street for next year.
With things like the Warhawk block and some new heads that are coming out of ET Performance eventually some form of hybrid LSx should be able to make even more power. So, I'm not going to give up on the engine just yet. Certainly we could make a dead serious SBC. And if the LSx doesn't quite get it together after a couple trys we'll certainly give it a better look. But, at the moment consistency wins so we're looking to make the middle of the field for now.
With things like the Warhawk block and some new heads that are coming out of ET Performance eventually some form of hybrid LSx should be able to make even more power. So, I'm not going to give up on the engine just yet. Certainly we could make a dead serious SBC. And if the LSx doesn't quite get it together after a couple trys we'll certainly give it a better look. But, at the moment consistency wins so we're looking to make the middle of the field for now.
Trending Topics
#8
The Bull
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The rules for both organizations have been opened up to support single up to 106mm and twins up to 88's I believe. 7.4's Will likely be the bump spot next year.
We get a few of the Pro and NSCA races here, so we're going to stick with the local stuff for now and look for other events on a occasional basis. I don't think we're going to be going all over the country for many races.
![Devil](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_devil.gif)
#12
TECH Enthusiast
iTrader: (2)
Join Date: Aug 2005
Location: Chicago
Posts: 674
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Ok guy's I have two thinks to ask from you. One i can I have that car? (or can you do that to my car!!?!!) and Two how the hell do you pronounce the name of the shop!?! Me and a buddy were discussing it last night haha. Can I get a breakdown or something on how to say it?
![Engarde](https://ls1tech.com/forums/images/smilies3/engarde.gif)
#15
The Bull
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by NA$TY-TA
do it...... i was wondering when u would....... ![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
![The Jester](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_jest.gif)
#16
The Bull
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by Carbed4thGen
Ok guy's I have two thinks to ask from you. One i can I have that car? (or can you do that to my car!!?!!) and Two how the hell do you pronounce the name of the shop!?! Me and a buddy were discussing it last night haha. Can I get a breakdown or something on how to say it? ![Engarde](https://ls1tech.com/forums/images/smilies3/engarde.gif)
![Engarde](https://ls1tech.com/forums/images/smilies3/engarde.gif)
![Happy](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_stretch.gif)
Like Kyle said, the shop name is prenounced Sti (Like Stiffler) and Nod
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
#20
The Bull
Thread Starter
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It's not so bad to get in and out. Kick both feet out the door and slide out. That's part of the reason why the seat is so far back, it greatly opened up the door.