What about Summit Poly seats?
Thread Starter
Joined: Jan 2003
Posts: 1,455
Likes: 0
From: Fort Worth, TX
What about Summit Poly seats? Has anyone used them? They are just as light as the Kirkey Pro's (12-14lbs.) and alot cheaper. 
Link: http://store.summitracing.com/defaul...=egnsearch.asp
Part # SUM-CSUM110
Link: http://store.summitracing.com/defaul...=egnsearch.asp
Part # SUM-CSUM110
Last edited by BAIN; Nov 28, 2005 at 11:12 AM.
Originally Posted by 4thGenCamaro
I have one, and like it.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by SUX2BU
VERY uncomfortable and ugly. Spend the $$$ and get a Kirkey.
And too be honest it's actually quite comfy, I was sittin in it in my house for a while last night too see if it was comfortable or not and it was pretty damn comfortable, maybe it's cuz i'm a big guy, but I just can't see the kirkey seat being more comfortable than one of these and I too have the cushioned cover (I thought they all were cushioned, but I could be wrong). 
My friend had one in his TA and they were uncomfortable for more than a 15 min ride. I sit in mine for about an hour at a time twice a day and absolutely love them. Quite a bit better than stock leathers.
i have the kirky pro street in mine and i would not have it any other way..i think the ones above dont look nearly as good as a kirky...maybe in a old car they would look good i juss think that the kirky fits the camaro's newer look...and plus they are comfy
Originally Posted by Loudmouth LS1
Hey, I have that exact seat, just got it, how'd you mount it in the car, any brackets I can get or did you customize it? I was thinking of just bolting it through the floor, but if I can figure out a better way, that'd be killer!
Originally Posted by fastlt1
What does that thing run?
If you are talking about how fast it runs, my best time with my old motor setup was 11.23@119.71, cam only. It was a tsp 231/237 cam, with a 3050 raceweight, and I had a stiff sidewall 28 in et drag on it which caused me to trap at 6200 in 3rd. My new setup is about 200 lbs lighter, th400 with RVMB & TB, 4.30 gear, and a slightly larger cam.
Originally Posted by 4thGenCamaro
If you are talking about how much it runs, I got mine for $65 shipped.
If you are talking about how fast it runs, my best time with my old motor setup was 11.23@119.71, cam only. It was a tsp 231/237 cam, with a 3050 raceweight, and I had a stiff sidewall 28 in et drag on it which caused me to trap at 6200 in 3rd. My new setup is about 200 lbs lighter, th400 with RVMB & TB, 4.30 gear, and a slightly larger cam.
If you are talking about how fast it runs, my best time with my old motor setup was 11.23@119.71, cam only. It was a tsp 231/237 cam, with a 3050 raceweight, and I had a stiff sidewall 28 in et drag on it which caused me to trap at 6200 in 3rd. My new setup is about 200 lbs lighter, th400 with RVMB & TB, 4.30 gear, and a slightly larger cam.
Originally Posted by 4thGenCamaro
Yes, why?
Originally Posted by SUX2BU
it just looks weird. i have carpet, roll bar, two seats with 5 point harnesses and wiegh in at 2960 with me in it. do you drive it around like that or is it just a track car?
Originally Posted by SUX2BU
it just looks weird. i have carpet, roll bar, two seats with 5 point harnesses and wiegh in at 2960 with me in it. do you drive it around like that or is it just a track car?