Rollcage pretty much complete...pics
Thread Starter
Joined: Nov 2001
Posts: 8,484
Likes: 0
From: Cecil County Raceway!!!
Rollcage pretty much complete...pics Local fabricator designed the cage to be somewhat easily adaptable to a SFI 25.5 down the road...
what a crapload of bars :grin:
[/img]
I don't think I'll ever be able to see out the back window (using the rearview mirror) :-p
[/img]
Driver side
[/img]
Passenger side
[/img]
hugs the t-tops nice. From the side, almost looks like a rollbar, can barely even notice the front half.
[/img]
what a crapload of bars :grin:
[/img]I don't think I'll ever be able to see out the back window (using the rearview mirror) :-p
[/img]Driver side
[/img]Passenger side
[/img]hugs the t-tops nice. From the side, almost looks like a rollbar, can barely even notice the front half.
[/img] Trending Topics
Thread Starter
Joined: Nov 2001
Posts: 8,484
Likes: 0
From: Cecil County Raceway!!!
Originally Posted by Villain281H
Looks damn good, was this an add-on to your previous bar or did you start from scratch?
Derek
Derek
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
A full cage only has to be 1 5/8 and a rollbar has to be 1 3/4? Does look damn good... I like the bar that is across the floor behind where the seats will be, that is a nice looking design. The bars that follow the floor by the doors, are those required, or were they put in for the 25.5? Just trying to figure out exactly what is needed for 9.99 to 8.50 vs. what you have going on there.
Thread Starter
Joined: Nov 2001
Posts: 8,484
Likes: 0
From: Cecil County Raceway!!!
Originally Posted by JL ws-6
A full cage only has to be 1 5/8 and a rollbar has to be 1 3/4? Does look damn good... I like the bar that is across the floor behind where the seats will be, that is a nice looking design. The bars that follow the floor by the doors, are those required, or were they put in for the 25.5? Just trying to figure out exactly what is needed for 9.99 to 8.50 vs. what you have going on there.
The sill bars (that run along the doors) are only required with a 10-pt if you modify the floorboards in any fashion, but are required for 25.5.
The fabricator has a custom window net made to fit the application (using the cage as a template), so it'll be about a week before the net is installed, but there will be a picture of it
Looks really nice Fireball. Tyson does some killer work.
On The Tree
Joined: Apr 2003
Posts: 101
Likes: 0
From: Valdosta, GA
Fireball where do you get all of your work done I live in the Valdosta, GA Area about 15 minutes from Cecil. It will be a little while before I really need anything done but it would be good info to know. PM me if you need to.
Thread Starter
Joined: Nov 2001
Posts: 8,484
Likes: 0
From: Cecil County Raceway!!!
Originally Posted by horsekilla 95TA
Fireball where do you get all of your work done I live in the Valdosta, GA Area about 15 minutes from Cecil. It will be a little while before I really need anything done but it would be good info to know. PM me if you need to.
I'm in the baltimore, md area
On The Tree
Joined: Apr 2003
Posts: 101
Likes: 0
From: Valdosta, GA
Originally Posted by Fireball
GA as in georgia? If so you must be thinking of a different cecil.
I'm in the baltimore, md area
I'm in the baltimore, md area
LOL yeah definetly thinking of the wrong track. Thanks anyway. Very nice cage.