01_ram-air

iTrader: (3)

I'm curious to see how you padded the bars. Did you just put the padding on or did you zip tie? Did you use something other than zip ties?

LS1SpeedAddict

iTrader: (9)

Zip ties ???, my dads car had velcro but that leaves a nast residue on the paint.

Duffster

iTrader: (103)

vinyl w/Velcro sewn to it. . .

BTLFEDSS

iTrader: (12)

Mine is zip tied more on the door bar than anywhere else
BTLFEDSS

Hrlyrdr97

iTrader: (8)

I would have liked to have seen some pics, too. Car at fabricators right now having roll bar installed. Should have it back next week. Looking at options.

01_ram-air

iTrader: (3)

Pictures?

xpndbl3

iTrader: (23)

just used regular zip ties, maybe 4 or 5 down the door bars and spaced the rest about 10inches apart all around the padding

ApacheDrill

iTrader: (21)

i used the Kirkey half pads on the swing outs.. they have double sided tape and hug to the bars no problems or need for zip ties.. ill get some pics

ApacheDrill

iTrader: (21)

here you go..

http://smg.photobucket.com/albums/v6...t=DSC01400.jpg

01_ram-air

iTrader: (3)

Come on, I know a lot of you guys have roll cages in your cars.

TwoFast4Lv

iTrader: (8)

I used Velcro Wire ties. They are used to tie computer and stereo wire into clean bundels. My dad used to work for the teliphone company and had a bunch laying around.

I have seen them at both stereo and computer stores

00SS4780

iTrader: (3)

Good olfashion zip tie's!

SVC707

iTrader: (33)

i dont have pads, just drive it the way it is. i dont even bother swinging the bar out. i kinda just slide over it

TheOutlaw

Who's swing-outs are they?

TwoFast4Lv

iTrader: (8)

They look like the Chris Allstons I used to have

SVC707

iTrader: (33)

custom build by a shop in Lodi, CA called "Fuller Fabrications" not sure what materials he uses. i just need to add a seat brace and its good to 9.99 he said.

JL ws-6

iTrader: (50)

you don't have top pad the door bars, only where your head can coem in contact with the bar.... and you are "supposed" to use the SFI padding, alot of places don't pay any mind to that as long as there's padding, but for the few bucks it costs, you're better off using the sfi approved stuff.

I used the velcro the stuff came with, but will be adding a few zip ties to it to hold it more secure to the rollbar

01_ram-air

iTrader: (3)

Please post some pics when you're done.

G&HRacing

Had my mom sew mine on her machine. Real soft vinyl and a thin padding with velcro sewn to it. Got it all at a fabric shop.

JL ws-6

iTrader: (50)

It's been done for a while... here's the pic's I have of it (in process and a few finished ones)

http://www.mainstreamtopics.com/~scr...%20Ws6%20Pics/