New best on drag radials
Thread Starter
TECH Regular
iTrader: (11)
Joined: Mar 2002
Posts: 433
Likes: 0
From: KANSAS CITY, MISSOURI
New best on drag radials the car went 11.96@117.14 on 275/50/15 bfg drag radials. air pressure was set at 15#'s 60ft was 1.77(also a new best) 
Re: New best on drag radials awesome.... i ran my car with dunlops and cut a 1.74 on those.. dunlop 8000's 275/40/17's baby and pulled a 12.01 with stock heads...
thats a awesome 60 for a M6 car on DR's!! Keep it up and with your mph and slicks you will have some 11.6-7's in here no doubt! Congrats
thats a awesome 60 for a M6 car on DR's!! Keep it up and with your mph and slicks you will have some 11.6-7's in here no doubt! Congrats
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Thread Starter
TECH Regular
iTrader: (11)
Joined: Mar 2002
Posts: 433
Likes: 0
From: KANSAS CITY, MISSOURI
Re: New best on drag radials You notice how I said "the car"? Whomever did the tune did a pretty good job.
I got my 2-step today so I should be able to dial it in enough to run consistent 11's.
I got my 2-step today so I should be able to dial it in enough to run consistent 11's.
Re: New best on drag radials very cool mike! i knew you could do it. also for those that dont know, this track doesnt hook well at all for MN6 cars. 1.9x is pretty much common for DR LS1s 
what rpm are you launching off at?
what rpm are you launching off at? 
Thread Starter
TECH Regular
iTrader: (11)
Joined: Mar 2002
Posts: 433
Likes: 0
From: KANSAS CITY, MISSOURI
Re: New best on drag radials I took off the ET streets because the stock rear won't hold many more 6,100 rpm launches. I went with drag radials so I can still have fun with it while I'm saving for my 12 bolt w/4:30's and a spool.
