4th Gen Carburetored Setups
Thats from 2004....He runs a Turbo setup now
Originally Posted by Outlaw
2002 Camaro
-- Lil Bri Fabrication Chassis 25-2 (Cert is 6.0 in ¼ mile or slower up to 3200#)
-- 100% stock floor.
-- 572ci BBC or 400ci SBC (Have both motors for the car and both have big power adders for them)
-- Mikes Ultimate Vasco Power Glide – Neal Chance converter
-- Moser 9inch – Strange Center Section – Tom’s differentials Axles
-- Wolfe Race Craft Rear Suspension – Double Adjustable sway bar – Tourqe Arm – LCA – Pan Hard bar
-- AJE K-Member Complete with Koni double adjustable Race struts
-- Willwood Race breaks all four corners
-- Weld Magnum 15X3.5 and 15X10 wrapped with M/T tires
-- Full interior with back seat, headliner and power windows!
BBC picture 2
Rear Suspension Picture
Cage Picture 1
Cage Picture 2
Cage Picture 3
TQ Arm Front Mount and Firewall mod
Under Frame and Suspension 1
Under Frame and Suspension 2
-- Lil Bri Fabrication Chassis 25-2 (Cert is 6.0 in ¼ mile or slower up to 3200#)
-- 100% stock floor.
-- 572ci BBC or 400ci SBC (Have both motors for the car and both have big power adders for them)
-- Mikes Ultimate Vasco Power Glide – Neal Chance converter
-- Moser 9inch – Strange Center Section – Tom’s differentials Axles
-- Wolfe Race Craft Rear Suspension – Double Adjustable sway bar – Tourqe Arm – LCA – Pan Hard bar
-- AJE K-Member Complete with Koni double adjustable Race struts
-- Willwood Race breaks all four corners
-- Weld Magnum 15X3.5 and 15X10 wrapped with M/T tires
-- Full interior with back seat, headliner and power windows!
BBC picture 2
Rear Suspension Picture
Cage Picture 1
Cage Picture 2
Cage Picture 3
TQ Arm Front Mount and Firewall mod
Under Frame and Suspension 1
Under Frame and Suspension 2
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
On The Tree
Joined: Feb 2006
Posts: 159
Likes: 0
No mid-plate.... I do have a limiter on it,and an ultra bell on the tranny,along w/a polly mount. I tried setting up a mid plate but it was turning into a major pita. I have made about 15 passes with it and have not had any trouble with it yet.
Thank you very much for pictures and info. Are you launching off of a transbrake? I've been contemplating setting up my N/A 406 with just a front plate. It makes in the neighborhood of 500hp and would be leaving off a transbrake.
Anyone else running with just a front plate?
Anyone else running with just a front plate?
i sold the mounts to a friend and he is now using them on his PA k-member
front suspension is coming along. i am done working on it prolly until winter. i got other projects i need to get done first. but i will be out next year, and back to fuel injection.
