bracketracerZ28

my 10 bolt is still in but I have sheared the pinion 3 times in the last year. Now have yukon 3.73 gears. I race almost every weekend though (for the last 3 years). Now I run a 2 step from lingenfelter and leave at 2300... so far so good, 1.61 60' on a LT, edge 3500, lid and the gears. The scary thing is the low reverse sprag in the tranny is taking out the rearend or vice versa, we haven't figured that one out yet

lifeisgood

iTrader: (4)

stock in mine. but im pulling 2.0 sixtys.lol

MATTREDSS

iTrader: (16)

Mine finally took a ****.

95zsean

iTrader: (1)

HOLY ****!!!!!!!! I've got a zexel T2R out of a 97SS with 40K on it, my tubes welded, a TA girdle with Motive 3.73 and ALL new bearing and I "was worried" Not now..LOL.

LT1Formula007

iTrader: (66)

Ok this is the first time I have seen this thread. lol
I don't know how I missed it, But I may as well go ahead and post that I have ran a best of 10.993 at 125.61 mph with a 1.659 60'. Thats with a 100,xxx mile 3.42 10 bolt from a 6 speed Trans Am.
With that being said, Mine is still going strong but is currently getting snatched out for a MWC Fab-9 this winter. I Don't really want to take anymore chances with it.

Camaro396

iTrader: (14)

Cam, headers, intake/TB, TH350, 5000 stall, 10 bolt

Fb0dy0nly

iTrader: (10)

Are we playing find the one that doesnt fit?

LT1Formula007

iTrader: (66)

LOL!

If so, I'll take 10 Bolt for $500 Please.

robsquikz28

iTrader: (246)

Was it the 99 blue camaro dont quote the year tho.. With the sleeper cam and full susp. looked bone stock??

robsquikz28

iTrader: (246)

btw I went 1.39 60s with my stock 10 bolt on a 26/10/15 slick and its still good....for now

jsafe

iTrader: (6)

mine just went POP BANG BOOM ugh..

cjtzcar

iTrader: (3)

Cant say weather it was the 10 bolt or welds, I know welded rear how old school but any how weld broke on spiders but no other damage and has been raced every weekend the track was open on 26/10/15 slicks and sometimes on 275 radials with a 1.50 60'' and best of 7.21 1/8 mile

pt4400 stall

SSmoken

iTrader: (26)

nice!

1997b4c

cam and bolt on lt1 with 150 shot.th350 trans and 3.42 gear in 10 bolt. 1.49 60ft-6.80@101.

dannyz

One of those old threads that now and then need to be re-posted.

mrstepheneades

Mine lasted at 800+rwhp for a year. Even with 28" m/t slicks and manual trans. Until I took it to the track. 4th pass trying different things to get it to hook off a 2800rpm 2step launch. Figured it out and stepped up to 3100rpm and broke the driver side axle into. As far as the center main part of the rear its fine. 9" setting waiting now plus whole car is getting redone now.

The Video of it breaking.