Smallish Spartan Spec'd cam/tune makes +80rwhp over bolt ons. Final #'s 409/394
#41
TECH Resident
iTrader: (35)
Join Date: Nov 2007
Location: Rowlett, TX
Posts: 762
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=Damian;11069462]Well my take on it is this. With today's knowledge about cams, the proper bolt ons, and tuning if you can't hit 400 rwhp in an M6 LS1 then you don't have any business touching the car ......On a serious note, you should be able to hit 400 rwhp no problem, even without the CNC heads. As stated above this car made 409 through FULL exhaust, no cutout on a STREET tune. Which is not setup to make the prettiest dyno number, but setup to run the best # on the street.
Hey bro, oh yeah, I know the 400hp is doable for sure, but I am looking for the TQ...could I pull out an extra 6+TQ outta the heads over your customer's car. I'm thinkin so, it looks pretty close.
Hey bro, oh yeah, I know the 400hp is doable for sure, but I am looking for the TQ...could I pull out an extra 6+TQ outta the heads over your customer's car. I'm thinkin so, it looks pretty close.
Last edited by Titanws6; 02-17-2009 at 10:53 PM.
#46
Jimbo, I appreciate that but I don't sell cams. I just spec things out for engines built in house.
All my cams are cut through Cam Motion now, I no longer use Comp. You can purchase that cam directly through them using the same specs.
Since this was brought back up, I'll throw this link in here also. This is the same cam doing 424 on another car. It's all about the attention to details gentleman. There's nothing fancy about this cam. It's the little things that matter....
https://ls1tech.com/forums/showthrea...referrerid=183
All my cams are cut through Cam Motion now, I no longer use Comp. You can purchase that cam directly through them using the same specs.
Since this was brought back up, I'll throw this link in here also. This is the same cam doing 424 on another car. It's all about the attention to details gentleman. There's nothing fancy about this cam. It's the little things that matter....
https://ls1tech.com/forums/showthrea...referrerid=183
Last edited by Damian; 11-29-2011 at 09:15 AM.
#49
12 Second Club
iTrader: (6)
Join Date: Nov 2010
Location: Killeen,TX
Posts: 201
Likes: 0
Received 0 Likes
on
0 Posts
Jimbo, I appreciate that but I don't sell cams. I just spec things out for engines built in house.
All my cams are cut through Cam Motion now, I no longer use Comp. You can purchase that cam directly through them using the same specs.
Since this was brought back up, I'll throw this link in here also. This is the same cam doing 424 on another car. It's all about the attention to details gentleman. There's nothing fancy about this cam. It's the little things that matter....
https://ls1tech.com/forums/showthrea...referrerid=183
All my cams are cut through Cam Motion now, I no longer use Comp. You can purchase that cam directly through them using the same specs.
Since this was brought back up, I'll throw this link in here also. This is the same cam doing 424 on another car. It's all about the attention to details gentleman. There's nothing fancy about this cam. It's the little things that matter....
https://ls1tech.com/forums/showthrea...referrerid=183
#51
MASS seller approved
iTrader: (148)
Join Date: Jul 2007
Location: ELSA, South TEXAS (956) 802-7700
Posts: 1,429
Received 134 Likes
on
90 Posts
Jimbo, I appreciate that but I don't sell cams. I just spec things out for engines built in house.
All my cams are cut through Cam Motion now, I no longer use Comp. You can purchase that cam directly through them using the same specs.
Since this was brought back up, I'll throw this link in here also. This is the same cam doing 424 on another car. It's all about the attention to details gentleman. There's nothing fancy about this cam. It's the little things that matter....
https://ls1tech.com/forums/showthrea...referrerid=183
All my cams are cut through Cam Motion now, I no longer use Comp. You can purchase that cam directly through them using the same specs.
Since this was brought back up, I'll throw this link in here also. This is the same cam doing 424 on another car. It's all about the attention to details gentleman. There's nothing fancy about this cam. It's the little things that matter....
https://ls1tech.com/forums/showthrea...referrerid=183
DAMIAN, YOU ARE AWESOME DUDE!!! I KNOW YOU HAVE PROVIDED ME SOUND ADVICE IN THE PAST WHICH HAS BENEFITED ME. FOR YOU TO TAKE SUCH TIME TO SHARE YOUR EXPERIENCE AND KNOWLEDGE IS TRULY AWESOME DUDE!!!
GOD BLESS U AND UR BUSINESS, ROB .