235/243 LSR cam results
#61
Was that the test and tune, Corky? I'll get the DA if you gimme a time/date.
#64
#65
10 Second Club
iTrader: (2)
Join Date: Apr 2004
Location: Nazifornia
Posts: 217
Likes: 0
Received 0 Likes
on
0 Posts
Had the same duration cam with a lot more lift in it in my old 346. Good cam and ran like a raped ape once I put the FAST intake on it. It was paired up with a set of 243's and put down 45x/40x.
#67
9 Second Club
iTrader: (4)
2yrs old I know but what are some of these car's running NA at the track? My dyno numbers are quite a bit lower than most of these but with a slipping 4L60E still managed 11.7@116mph.
Here is the dyno graph from Holley LSFest 2011:
And here is a dyno graph after a little AFR/timing tweaking on our dyno:
Here is the dyno graph from Holley LSFest 2011:
And here is a dyno graph after a little AFR/timing tweaking on our dyno:
#69
On The Tree
I went 11.41 @ 125/126 in better air and never got to run it again that year. Had the fast ported and went for a retune and had valve train issues on the dyno. Still working on clearing that all up
#70
I know this threads old, but just put this 235/243 113lsa cam in my LS1 383 stroker, made 322rwkw (431rhwp) and 660nm of torque through an 4l60e gearbox with a 3600 stall convertor and 3.07 rear diff gears.
have 1-7/8 headers and fast 102mm manifold/tb setup, ported heads and bigger valves.
Had torque and power curve basically identical to the first dyno graph on page 1.
Got a decent choppy idle and goes like a rocket when the throttle is applied.
have 1-7/8 headers and fast 102mm manifold/tb setup, ported heads and bigger valves.
Had torque and power curve basically identical to the first dyno graph on page 1.
Got a decent choppy idle and goes like a rocket when the throttle is applied.