Stock LS1 800whp tuned by dynotech.se
#1
Stock LS1 800whp tuned by dynotech.se
I did dyno/tune this quite a uniqe combo in my shop yesterday. BMW E31 850 with Stock Ls1 (with ls6 valvesprings), Borgwarner 475 and 14psi of boost, e85 fuel.
802whp and 1010nm (745ftlbs) at 1bar (14psi).
Dyno graph.
Enginebay.
802whp and 1010nm (745ftlbs) at 1bar (14psi).
Dyno graph.
Enginebay.
Last edited by Robert Von Karlsson; 09-06-2012 at 09:56 PM.
Trending Topics
#10
Banned
iTrader: (15)
800 is a bit much but we had an LS6 car we tuned here with a cam, Fast and a D1 Procharger making 750. Was boosted for about 12k miles. Starting at about 650rwhp then by the end went to 753. Engine had 93k miles on it. It eventually cracked a ring land. Still runs but just puffs smoke.
#13
On The Tree
Join Date: Jan 2010
Location: San diego , CA
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
#14
TECH Junkie
iTrader: (5)
not to be a dick but i dont see a stock ls1 with stock heads and cam making that power on 14psi. happy dyno? 14psi on a stock ls1 should be around 600 rwhp