jmrobinson

I'm finally building up my corvette I'm doing full exhaust ls6 intake and I'm using a set or ported 241 heads and I was wanting to see what people with different cams were making with similar setups so post your numbers and the driveability and milage with your setup thanks guys

jmrobinson

I guess I should mention I'm wanting a street car but it will race fairly often and it's not a daily driver so I'm looking for what u make with a decent sized cam but I can still take through town and cruise the weekends looking for a race

HCI2000SS

iTrader: (2)

With those heads and intake you're probably looking at a 420-440 rwhp setup regardless of the cam. Of course it will depend on the dyno

soddy rebel

iTrader: (1)

im running ported 241s with a MS3 cam and made 408 rwhp through a 4l60e.

Omega Doom

iTrader: (2)

yea I have stock 241s with a RPM5 cam(similar to the MS3 in specs) and dynode 414rwhp thru a stock 4l60e and Yank 4200 stall

I would love to have some PRC as cast 225 or 227s though along with a UD Pulley, bigger injectors with a Fast92 and a nitrous kit and Ive been thinking how would Low lash solid roller cam do as far as increasing any more power compared to my current cam and my car is NO WEEKEND warrior fellas its my DD

jmrobinson

What kind of milage are you guys getting I usually get about 34 highway and 18-23 in my vette m6 car

elephantrider

iTrader: (2)

im running ai 241 heads with ms3 cam and making 440/400 through
a m6.

redbird555

iTrader: (14)

I ran stock 243 heads with a 230/232 114 f13 cam and made 450/400

z-maro

iTrader: (18)

The 219 AI's?