HioCrew LBO LS1 hits the rollers: 371rwhp stock cam and heads
#122
11 Second Club
Thread Starter
#123
11 Second Club
Thread Starter
Have followed through on the above mention mods, small improvement and still sorting 60' out. The car spent the better half of summer with the trans internals at Liberty Gear to get face plated. Best pass for the year is 11.79 @ 117 mph with a 1.65 60'
The following 3 users liked this post by TheeCamaroKid:
The following 2 users liked this post by TheeCamaroKid:
99 Black Bird T/A (10-15-2022), HioSSilver (10-15-2022)
The following 3 users liked this post by TheeCamaroKid:
The following users liked this post:
TheeCamaroKid (10-15-2022)
#127
TECH Senior Member
The following 2 users liked this post by G Atsma:
HioSSilver (10-16-2022), TheeCamaroKid (10-15-2022)
The following users liked this post:
G Atsma (10-16-2022)
#129
11 Second Club
Thread Starter
Cam only times
Ended up installing a free Futral 228/232 cam I got from another member and my take on the Chris1313 pro stock intake, first time at the track since the cam install. 1/8mile to 1/4mile maths out to a 11.06. Was a bit of a cross wind so we had to run 1/8 mile in the afternoon. Still on a 10bolt.
Ended up installing a free Futral 228/232 cam I got from another member and my take on the Chris1313 pro stock intake, first time at the track since the cam install. 1/8mile to 1/4mile maths out to a 11.06. Was a bit of a cross wind so we had to run 1/8 mile in the afternoon. Still on a 10bolt.
#130
TECH Senior Member
And just when I thought this might become a necro-thread.... LOL!
#131
11 Second Club
Thread Starter
Been busy, swapped cams in the spring of 23 and did all the tuning, but had a busy summer, by fall I was in the midst of buying the business off my employer, that process took until April of 2024. I’ve been busy with co running the business with my best friend and partner and finally at a point where I can focus on my car a bit. Were not done with the car. It will go 10s with this cam……what happens after that I’m not sure. Bigger cam?heads?turbo?nitrous?
The following users liked this post:
G Atsma (09-01-2024)
The following 2 users liked this post by HioSSilver:
DualQuadDave (09-08-2024), G Atsma (09-04-2024)
#133
TECH Senior Member
The following users liked this post:
HioSSilver (09-04-2024)
The following users liked this post:
SLP IROC-Z (Today)
#139
11 Second Club
Thread Starter
we trying! hes got a 2024 SS that he wants to play with now
yes still on the 10 bolt
saving its *** anyway. I still dont think im using the tamer to the best if its ability. New 26X10s next year so ill have to relearn those with the tamer
yes still on the 10 bolt
saving its *** anyway. I still dont think im using the tamer to the best if its ability. New 26X10s next year so ill have to relearn those with the tamer