fm11 & g5x1 dynographs please
#1
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jul 2004
Location: mayville,mi
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
fm11 & g5x1 dynographs please
trying to decide on fm11 or g5x1 they seem pretty close id just like to compare the torque curves of these cams thanks for any comments or graphs
#3
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jul 2004
Location: mayville,mi
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
well i bought the g5x1
still would like to see some torques curves i know someone here has one. (preferably with stock heads)seems like i seen a comparison from someone which compared 3 different cams but i cant find it with the search.
also i know these specs are not ideal for nitrous BUT what are the drawbacks
125 wetshot on g5x1 228/232 .588/574 112 how is the nitrous going to affect the
more air in and less air out? p.s wifes gonna be pissed told her cam would idle like stock ohshit (keep me in your prayers)
still would like to see some torques curves i know someone here has one. (preferably with stock heads)seems like i seen a comparison from someone which compared 3 different cams but i cant find it with the search.
also i know these specs are not ideal for nitrous BUT what are the drawbacks
125 wetshot on g5x1 228/232 .588/574 112 how is the nitrous going to affect the
more air in and less air out? p.s wifes gonna be pissed told her cam would idle like stock ohshit (keep me in your prayers)
#6
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jul 2004
Location: mayville,mi
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by black_z
Be sure to post up the graph when you get it tuned.
Trending Topics
#13
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jul 2004
Location: mayville,mi
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 98TAauto
good info..... look like ill loose a tad of low end, but gain about 15hp uptop.. i went from the 224 to the F11
good in a way since shift extension is 5400-6500
good in a way since shift extension is 5400-6500
#14
TECH Fanatic
iTrader: (22)
I have the G5X1 in my car. That graph sounds about right. This cam gives up a little on the low end but really picks up on top. I would def. recommend gears.
Good luck on the tune. I never realized the full potential of the cam b/c I never had it tuned and am pulling it out for a turbo kit in the next few days. Without a tune, it idled like ****. Cold starts are a bitch and until you idle for a couple minutes and make a few stops I had to give it gas to keep it from dying. Once it found an idle it sounded badass though!
Good luck on the tune. I never realized the full potential of the cam b/c I never had it tuned and am pulling it out for a turbo kit in the next few days. Without a tune, it idled like ****. Cold starts are a bitch and until you idle for a couple minutes and make a few stops I had to give it gas to keep it from dying. Once it found an idle it sounded badass though!
#16
TECH Junkie
iTrader: (36)
Originally Posted by black_knight
You people need to pay more attention. That graph is a G5X2, not a G5X1.
#18
Originally Posted by Black02SS
They don't care, all they are doing is looking at the numbers and not taking into account that it isn't a true comparison. The car needs to be tuned for each cam, then you can make a GOOD ACCURATE comparo.
#19
SN95 Director
iTrader: (16)
Originally Posted by Black02SS
They don't care, all they are doing is looking at the numbers and not taking into account that it isn't a true comparison. The car needs to be tuned for each cam, then you can make a GOOD ACCURATE comparo.