Dyno on Mon. : Take your guess!!
Mods are:
Lid, smooth bellows, ported tb, LS6 intake, Torquer 2 cam (232/234 112 LSA), Powerbond ud pulley, Pacesetter LTs, Hooker ORY w/ Flowmaster merge into a Maganaflow single in dual out muffler.
With Lid, Catback, and ported TB it put down 336rwhp and nearly 350rwtq on 6/25/05.
So...Whats your best guess?
Mods are:
Lid, smooth bellows, ported tb, LS6 intake, Torquer 2 cam (232/234 112 LSA), Powerbond ud pulley, Pacesetter LTs, Hooker ORY w/ Flowmaster merge into a Maganaflow single in dual out muffler.
With Lid, Catback, and ported TB it put down 336rwhp and nearly 350rwtq on 6/25/05.
So...Whats your best guess?
good luck

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.
Trending Topics
The Best V8 Stories One Small Block at Time
I'll get the graph up later today...
damnit, I was a dumbass and made a mistake when I posted my torque: I just went off of what the bottom of the graph said and i didnt realize that there was a spike because of some problems they were having witht the RPM sending unit, or something like that. The horsepower is right though and they are SAE numbers.Patrick G., you and Black98Z28 were right on about the torque its somewhere between 380 and 390 right at 5000 rpms.
The graph i got from the dyno was printed on a shitty printer and its very light, I'll post up my graphs as soon as I get them sent from the dyno shop.




