Trex Dyno Numbers Are In!!!!

Reply Subscribe

Thread Tools

Search this Thread

Mar 3, 2006 | 05:55 PM

#41

DanZ28

10 Second Club

iTrader: (5)

Joined: Nov 2001

Posts: 3,412

Likes: 0

From: Cali/Bay Area

Quote:

Originally Posted by BAIN

As in?...... Dyno #'s or track times? Also are you really going to post the results if the T-Rex is better?? Good luck either way

As in both. It will not however be an apples to apples comparison as to much has changed. Of course I will post results either way, I have no reason to hide anything and it's not that I don't like the Trex, it had it's purpose, but my purpose changed so out came the cam. I could tell the differences in drivability right away to. I didn't consider the Trex to be a difficult cam to street, but it had big cam manners and no one here can really claim it doesn't, well, at least not truthfully IMO, but it can be tuned to be very reasonable on the street with proper gears M6 and proper stall A4. The Trex was an experiment (had one of the first ones) that replaced my TR230 cam, I got the same ET but gained 2 MPH. So I'll just see how it goes with this one, if I don't like it, I'll try something else.

Dan

Mar 3, 2006 | 06:39 PM

#42

BAIN

10 Second Club

iTrader: (5)

Joined: Jan 2003

Posts: 1,455

Likes: 0

From: Fort Worth, TX

Cool I'm glad your doing a good comparison and figured out it's not for you. There have been a lot of haters out there lately. I never tell anyone that the T-Rex cam is for everyone. It's all in what you can put up with and since it was designed to be a flat out race cam for stock heads sometimes that's a lot

With a great tune to me it's not bad at all and I drive it every day. My girlfriend would rather drive my car than her basically stock 02 Camaro

Mar 8, 2006 | 05:31 AM

#43

bernard shortt

Staging Lane

iTrader: (1)

Joined: Jun 2005

Posts: 79

Likes: 0

trex cam afr heads ported by tea putting down 456 hp 453 tq at 5400 rpm in slp ls2 runs 6's in the 1/8 going to bristol this weekend to see what happens in the 1/4

Mar 8, 2006 | 08:10 AM

#44

BAIN

10 Second Club

iTrader: (5)

Joined: Jan 2003

Posts: 1,455

Likes: 0

From: Fort Worth, TX

Quote:

Originally Posted by bernard shortt

trex cam afr heads ported by tea putting down 456 hp 453 tq at 5400 rpm in slp ls2 runs 6's in the 1/8 going to bristol this weekend to see what happens in the 1/4

Might want to tell everyone that it's in a 402

https://ls1tech.com/forums/dynamometer-results-comparisons/372226-dyno-numbers-slp402ls2-afr-heads-ported-tea.html

Reply Subscribe