Cam Only Dyno Numbers!!!......236/236
#1
10 Second Club
Thread Starter
iTrader: (17)
Join Date: Apr 2004
Location: Alloway,NJ
Posts: 2,409
Likes: 0
Received 0 Likes
on
0 Posts
Cam Only Dyno Numbers!!!......236/236
well roshan(chummmma) got me tuned in and i pulled a
418 RWHP and 380 RWTQ
heres the package i put in.
Comp Cam 236/236 .602/.602 114+2
ls2 timing chain
ls7 lifters
ls6 oil pump
comp dual springs
titanium retainers
SVO 30# injectors
now to hit the track in fall.
Big THANKS to Roshan and Joe, w/out them i counldnt have done it!!!
-brandon
418 RWHP and 380 RWTQ
heres the package i put in.
Comp Cam 236/236 .602/.602 114+2
ls2 timing chain
ls7 lifters
ls6 oil pump
comp dual springs
titanium retainers
SVO 30# injectors
now to hit the track in fall.
Big THANKS to Roshan and Joe, w/out them i counldnt have done it!!!
-brandon
#3
On The Tree
iTrader: (8)
Join Date: Sep 2004
Location: NJ
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
way to go ... you didnt even post the graph... the torque carries well over 350 from roughly 3200 (when we started sampling) and holds past 6k.... the car is just an animal.car is asking for a fast 90/90 combo...
still needs a lil fine tuning... for some reason it kept gaining power increasing timing.... and had 0 knock so i gotta see when it stops making more power.. that run was with 30 degrees!
this same cam with a set of revalved ls1 heads on my car put down 411/389 through built a4 with a 4000 stall and a 12 bolt... with ls6 intake no ud pulley.
still needs a lil fine tuning... for some reason it kept gaining power increasing timing.... and had 0 knock so i gotta see when it stops making more power.. that run was with 30 degrees!
this same cam with a set of revalved ls1 heads on my car put down 411/389 through built a4 with a 4000 stall and a 12 bolt... with ls6 intake no ud pulley.
#6
Launching!
iTrader: (1)
Join Date: Jul 2005
Location: Michigan
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Awesome numbers, I can't wait to see the graph. What is your full mod list? Did you flycut? I am getting my car tuned right now, I have a 236/236 .602/.602 LSA 113+0 with ported LS6 heads. I hope I can break the 440 RWHP mark. My compression will be between 11.31-11.78 depending on deck hieght, and my dynamic compression will be between 8.18-8.5X.
Last edited by Cgillies86; 08-09-2006 at 08:21 AM.
Trending Topics
#8
On The Tree
iTrader: (8)
Join Date: Sep 2004
Location: NJ
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Toasty
How does the car drive?
#10
10 Second Club
Thread Starter
iTrader: (17)
Join Date: Apr 2004
Location: Alloway,NJ
Posts: 2,409
Likes: 0
Received 0 Likes
on
0 Posts
you cant do cam only and not do the valvetrain.
car drives just asa good, love the nice idle now at stops.
cgillies86...you wont be disappointed in the cam choice. you should def see 440.
-brandon
car drives just asa good, love the nice idle now at stops.
cgillies86...you wont be disappointed in the cam choice. you should def see 440.
-brandon
#11
Launching!
Join Date: Apr 2005
Location: Abilene, TX
Posts: 263
Likes: 0
Received 0 Likes
on
0 Posts
well you have to do supporting mods for a cam that size, ie. springs, retainers, etc. I put down 411 hp 385 tq with cam only (as in no heads, lifters, pistons, crank etc.)
#12
Originally Posted by Cgillies86
Awesome numbers, I can't wait to see the graph. What is your full mod list? Did you flycut? I am getting my car tuned right now, I have a 236/236 .602/.602 LSA 113+0 with ported LS6 heads. I hope I can break the 440 RWHP mark. My compression will be between 11.31-11.78 depending on deck hieght, and my dynamic compression will be between 8.18-8.5X.
#14
10 Second Club
iTrader: (10)
Join Date: Feb 2004
Location: Manteca, CA
Posts: 1,212
Likes: 0
Received 0 Likes
on
0 Posts
Tuning and injectors are just to get the Cam to run to its potential. Tuning tools per se. I can't think of too many people that would run any cam on stock tuning for very long without wanting to optimize their setup! Why spend the money for the requisite valvetrain upgrade, and cam itself without going the extra step and tuning it?
#15
10 Second Club
iTrader: (18)
Originally Posted by GR33N GoblinM6
thought you said CAM ONLY ... not Cam + Injectors + Springs + Titanium retainers + oil pump + LS7(1.85) lifters, + tuning for 30#injectors..
You CAN'T install a cam without upgrading your valvetrain. "Cam only" means just a cam, not heads/cam. It doesn't mean that's the only thing done
#17
Launching!
iTrader: (1)
Join Date: Jul 2005
Location: Michigan
Posts: 270
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Dave@LivernoisDSS
Im really interested to see how your car runs afterwards
Last edited by Cgillies86; 08-09-2006 at 10:00 PM.
#18
10 Second Club
Thread Starter
iTrader: (17)
Join Date: Apr 2004
Location: Alloway,NJ
Posts: 2,409
Likes: 0
Received 0 Likes
on
0 Posts
well in another thread i posted that i had to replace the lifters, due to one being gouged out and it scared the stock cam. the stock 26lb injectors wont hold the fuel supply for this cam either, they would be maxed out at around 4500.
its very nice and streetsable.
w/ even split cams the tuning is 10x easier and faster to get dialed in. she idles at around 900. and i love the good/bad looks i get sitting at a light lol.
-brandon
its very nice and streetsable.
w/ even split cams the tuning is 10x easier and faster to get dialed in. she idles at around 900. and i love the good/bad looks i get sitting at a light lol.
-brandon
#19
TECH Senior Member
iTrader: (18)
Join Date: Jun 2002
Location: NW Houston, TX
Posts: 10,036
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by GR33N GoblinM6
thought you said CAM ONLY ... not Cam + Injectors + Springs + Titanium retainers + oil pump + LS7(1.85) lifters, + tuning for 30#injectors..
Im sure you meant 1.85 rockers, and hes still using the stock rockers. Theres not really any performance gain with going to LS7 lifters.