Full bolt on Dyno Results
Thread Starter
TECH Resident
iTrader: (10)
Joined: May 2005
Posts: 835
Likes: 0
From: Long Island, NY
Full bolt on Dyno Results Ok, had my car dyno-ed today at Vette Doctors on long island, not so happy with the numbers, but extremely impressed by the new feel
Mods:
B&M shifter
QTP LTs 1 7/8 primaries 3 in collector
TSP catted Y
Rumbler
P&P TB by Tim
K&N filter
SLP CAI
MTI Lid
A/M SS hood (functional)
!AIR
!EGR
think thats it
Heres the chart:
EDIT: I am happy with the numbers, I was just looking for 340 RWHP, but this plenty, and it is tuned... Thanks for all the views and comments
Mods:
B&M shifter
QTP LTs 1 7/8 primaries 3 in collector
TSP catted Y
Rumbler
P&P TB by Tim
K&N filter
SLP CAI
MTI Lid
A/M SS hood (functional)
!AIR
!EGR
think thats it
Heres the chart:
EDIT: I am happy with the numbers, I was just looking for 340 RWHP, but this plenty, and it is tuned... Thanks for all the views and comments
Last edited by greatskiiiier; Apr 30, 2007 at 07:37 PM.
I was wondering the same thing. Those are very large headers, expecially for a stock displacement bolton motor.
Like stated above... grab an LS6 Intake Manifold/ ASP Pulley/ and Tune and I'd say you'd be very happy!
Like stated above... grab an LS6 Intake Manifold/ ASP Pulley/ and Tune and I'd say you'd be very happy!
Trending Topics
Thread Starter
TECH Resident
iTrader: (10)
Joined: May 2005
Posts: 835
Likes: 0
From: Long Island, NY
... The guy that dynoed my car also said I had 425ish at the crank, my friend claims 15-16% drivetrain loss and the dyno guy if full on ****, whose right? they guy that was dynoing my car all day, or my friend thats hasn't been in it scince the tune?
Last edited by greatskiiiier; May 1, 2007 at 02:03 PM.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
TECH Resident
iTrader: (10)
Joined: May 2005
Posts: 835
Likes: 0
From: Long Island, NY
Originally Posted by 98SS2836
The only thing that is right is the engine dyno 
Originally Posted by Marc '99T/A
Got mine done today; pretty similar results.
Last edited by greatskiiiier; May 1, 2007 at 06:51 AM.
Yeah, kinda surprised you are running that header on a pretty much stock car.
Who cares about engine hp, you arent putting that to the ground. No way that you are making 400+ at the motor anyway. There is not that much loss in the drivetrain.
Who cares about engine hp, you arent putting that to the ground. No way that you are making 400+ at the motor anyway. There is not that much loss in the drivetrain.
Originally Posted by WS6FirebirdTA00
Yeah, kinda surprised you are running that header on a pretty much stock car.
Who cares about engine hp, you arent putting that to the ground. No way that you are making 400+ at the motor anyway. There is not that much loss in the drivetrain.
Who cares about engine hp, you arent putting that to the ground. No way that you are making 400+ at the motor anyway. There is not that much loss in the drivetrain.
I care about engine horsepower. It is really the most accurate way to tell how much horsepower you have especially with all these chassis dyno numbers be inflated!
Originally Posted by WS6FirebirdTA00
Yeah, kinda surprised you are running that header on a pretty much stock car.
Who cares about engine hp, you arent putting that to the ground. No way that you are making 400+ at the motor anyway. There is not that much loss in the drivetrain.
Who cares about engine hp, you arent putting that to the ground. No way that you are making 400+ at the motor anyway. There is not that much loss in the drivetrain.
I care about engine horsepower. It is really the most accurate way to tell how much horsepower you have especially with all these chassis dyno numbers bein inflated!
Originally Posted by greatskiiiier
Got the headers for $325, couldn't go wrong for newv QTPs that cheap... kinda regreating it now...
Like everyone else said, LS6 intake and pulley are a must too.
Thread Starter
TECH Resident
iTrader: (10)
Joined: May 2005
Posts: 835
Likes: 0
From: Long Island, NY
Originally Posted by MikeG
You could probably sell those on here for twice what you paid for 'em. Then turn around and buy some 1 3/4" headers that are more suited to your setup.
Like everyone else said, LS6 intake and pulley are a must too.
Like everyone else said, LS6 intake and pulley are a must too.
I COULD take em out and put in something smaller, but I'd still have a net loss.
Plus my funds are down to the last couple hundred bucks, and now I need to get a lawyer... (Never let your friend's talk you into being the get away driver for some stupid prank)
Think if I replace the resonator for like a flow master, or something REALLY restrictive, it might help me out with back pressure?