408 Dyno
Thread Starter
Staging Lane
Joined: Mar 2005
Posts: 93
Likes: 0
From: Michigan
408 Dyno My buddy's car just dyno'd 518hp the other day, how are these results for the combo?
LME 408
Not sure which factory heads, but they're ported
Edelbrock vic jr intake with elbow and Accufab TB
Hyd Roller 250'ish .650'ish
around 12:1 CR
Kooks Race headers
TH400
9''
Not sure if I'm forgetting anything!
Thanks!
LME 408
Not sure which factory heads, but they're ported
Edelbrock vic jr intake with elbow and Accufab TB
Hyd Roller 250'ish .650'ish
around 12:1 CR
Kooks Race headers
TH400
9''
Not sure if I'm forgetting anything!
Thanks!
Those are damn good numbers for an auto...Was the pull done the the verter locked?..Typically there is about a 15% drivetrain loss...Its hard to say, but with the 9'' and the tranny it might be a little higher in your case...He should be right around 600FWP give or take...Congrats for your buddy... 
Kev
Kev
Thread Starter
Staging Lane
Joined: Mar 2005
Posts: 93
Likes: 0
From: Michigan
Will someone please explain how his dyno numbers aren't impossible!!! I have a bunch of Nay-sayers on a Pontiac forum that say "there is no way the car will run 10's on ls1 heads, and ported ls1 heads won't yield more than 450 RWHP"
Thread Starter
Staging Lane
Joined: Mar 2005
Posts: 93
Likes: 0
From: Michigan
If you put that much power down through a TH400 and a 9" there is no reason why that thing won't run mid 10's or better, depending on how much it weighs. TH400's usually eat power, but run better at the track than what the dyno indicates.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
I tried!!
You tell them!!
Funny thing is, they don't even believe me that the car put down 518....
http://www.clubgp.com/newforum/tm.as...e=1&s=#3917950
You tell them!!
Funny thing is, they don't even believe me that the car put down 518....
http://www.clubgp.com/newforum/tm.as...e=1&s=#3917950
You can't put down 450 with ported 241s? I make 432 with bone stock heads through a 9'' and a twin disc clutch. Before I got this car, with a 10 bolt and a single disc clutch, it made 466 with the smae untouched stock heads. You can go ahead and raise the BS flag on the "ported ls1 heads won't yield more than 450 rwhp."
Thread Starter
Staging Lane
Joined: Mar 2005
Posts: 93
Likes: 0
From: Michigan
Jesus christ, they never stop!!!
Anyways, my buddy was pretty happy with the results....
I kinda thought it'd dyno closer to 550...but the cam I guess is a nitrous cam, so I don't know....518 is still really well though
Speed Inc did a great job even though they had to "rough it"
Anyways, my buddy was pretty happy with the results....
I kinda thought it'd dyno closer to 550...but the cam I guess is a nitrous cam, so I don't know....518 is still really well though
Speed Inc did a great job even though they had to "rough it"
