408 Ls3/l92 467/460
#44
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i didnt even think about the wideband going on the tailpipe with the cutout open. do you think that may have messed up the AF reading.
I do know the lifters are not happy, If i do put new lifters in it I am gonna put a different cam in it. I dont know what it weighs, ill try to make it to the test and tune friday.
I do know the lifters are not happy, If i do put new lifters in it I am gonna put a different cam in it. I dont know what it weighs, ill try to make it to the test and tune friday.
#50
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The torque lost down low isnt a factor as it was only below 5000rpm's in first gear. She ran 11.7@125mph untuned 2 weeks ago and reving to 6000. last friday the power dropped off up top, and gradually got worse throughout the night. The valvetrain is not happy so its where I am looking right now. i do have pic's of the setup ill post them up tonight. We knew the "caddy" lifters would not hold up to the spring tension we threw at them. Jeff said it would only be a mater of time before they gave out. and believe me they gave out.
#53
TECH Junkie
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The torque lost down low isnt a factor as it was only below 5000rpm's in first gear. She ran 11.7@125mph untuned 2 weeks ago and reving to 6000. last friday the power dropped off up top, and gradually got worse throughout the night. The valvetrain is not happy so its where I am looking right now. i do have pic's of the setup ill post them up tonight. We knew the "caddy" lifters would not hold up to the spring tension we threw at them. Jeff said it would only be a mater of time before they gave out. and believe me they gave out.
#54
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Im gonna go with the Morel hydraulic lifters they seem to be the lifter everyone recommends.
pics post #1 and #10: https://ls1tech.com/forums/generatio...ock-elbow.html
pics post #1 and #10: https://ls1tech.com/forums/generatio...ock-elbow.html
#58
TECH Addict
iTrader: (22)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
The torque lost down low isnt a factor as it was only below 5000rpm's in first gear. She ran 11.7@125mph untuned 2 weeks ago and reving to 6000. last friday the power dropped off up top, and gradually got worse throughout the night. The valvetrain is not happy so its where I am looking right now. i do have pic's of the setup ill post them up tonight. We knew the "caddy" lifters would not hold up to the spring tension we threw at them. Jeff said it would only be a mater of time before they gave out. and believe me they gave out.