final heads/cam #'s

Reply Subscribe

Thread Tools

Search this Thread

Mar 15, 2008 | 10:40 PM

#21

silverbeast

TECH Fanatic

iTrader: (16)

Joined: Oct 2003

Posts: 1,456

Likes: 0

From: Ruffin,N.C.

I think you will be pleased. My car made 434 rwhp and 397 rwtq before the 12 bolt and im a M6 w/ a fast 90 . My car ran 11.60's @ 119 in the 95 degree heat so i think you will run low 11's @ 122 mph. good luck

Mar 15, 2008 | 11:50 PM

#22

odarabla

Thread Starter

10 Second Club

iTrader: (1)

Joined: Sep 2007

Posts: 1,500

Likes: 0

From: In Uranus!

Quote:

Originally Posted by silverbeast

Hope so thanks man!!

Mar 19, 2008 | 10:40 AM

#23

odarabla

Thread Starter

10 Second Club

iTrader: (1)

Joined: Sep 2007

Posts: 1,500

Likes: 0

From: In Uranus!

Found out for sure the tranny was slipping during this dyno! It finaly died 2 days ago and I getting a new built tranny installed as we speak!! I may have it dynoed again to see if it made a diffrence..

Mar 19, 2008 | 11:53 AM

#24

PewterScreaminMach

TECH Addict

iTrader: (7)

Joined: Sep 2006

Posts: 2,628

Likes: 2

From: Austin, TX

If your tranny is up to par, I bet you'll see low 11s on real sticky tires. Do it and let us know!

Mar 19, 2008 | 12:44 PM

#25

chrs1313

10 Second Club

iTrader: (24)

Joined: Feb 2005

Posts: 5,703

Likes: 13

anything over 100rwhp for H/C is great...i would definitely be happy...

Mar 19, 2008 | 02:38 PM

#26

odarabla

Thread Starter

10 Second Club

iTrader: (1)

Joined: Sep 2007

Posts: 1,500

Likes: 0

From: In Uranus!

Thanks again guys!!

Mar 19, 2008 | 02:52 PM

#27

Ron@Vengeance

FormerVendor

iTrader: (51)

Joined: Nov 2001

Posts: 5,628

Likes: 1

From: Cumming GA

Good #s !!!

Mar 19, 2008 | 04:05 PM

#28

RedDemonLsX

Launching!

iTrader: (2)

Joined: Feb 2007

Posts: 297

Likes: 0

From: Ft Myers,Florida

I made 430/405 unlocked with those heads milled to 61cc,a torquer v2,ported FAST,and through a PT4000 ...Seems fine to me...Have fun with her

M6>>>A4 when it comes to dyno's

A4>>>M6 at the track