SI5 cam only guesses?
SI5 cam only guesses? Well I will be getting a cam swap done on my 2000 M6 SS soon and was wondering if anyone has any guesses on what it will put down? The car already put down 358rwhp and 366rwtq with boltons.
My supporting mods are:
Lid
Fast/NW 92/90
U/D pulley
LTs with an ORY and Magnaflow exhaust
built trans. with LS7 clutch
9" with 3.89s
My supporting mods are:
Lid
Fast/NW 92/90
U/D pulley
LTs with an ORY and Magnaflow exhaust
built trans. with LS7 clutch
9" with 3.89s
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo Yeah, with the help of your bro Larry and watching your Dad's car at Byron is why I decided to go with the SI5. Both your brother and your dad are very helpful and great people to talk to. Speed Inc. will actually be doing the install. You own the SOM Malibu right. Your car is wicked!!! 
What's the specs on an SI5?
I made 412 with mostly the same mods, with the cam in my sig. That's on a CTS-V with rubberized crap throughout the drivetrain (making it closer to 20% loss), and stock 3.73 IRS.
Depending on the cam's size, I'd bet you'd make about what I do, assuming you have stock 241's.
When are you installing & dyno'ing?
-chris
I made 412 with mostly the same mods, with the cam in my sig. That's on a CTS-V with rubberized crap throughout the drivetrain (making it closer to 20% loss), and stock 3.73 IRS.
Depending on the cam's size, I'd bet you'd make about what I do, assuming you have stock 241's.
When are you installing & dyno'ing?
-chris
What's the specs on an SI5?
I made 412 with mostly the same mods, with the cam in my sig. That's on a CTS-V with rubberized crap throughout the drivetrain (making it closer to 20% loss), and stock 3.73 IRS.
Depending on the cam's size, I'd bet you'd make about what I do, assuming you have stock 241's.
When are you installing & dyno'ing?
-chris
I made 412 with mostly the same mods, with the cam in my sig. That's on a CTS-V with rubberized crap throughout the drivetrain (making it closer to 20% loss), and stock 3.73 IRS.
Depending on the cam's size, I'd bet you'd make about what I do, assuming you have stock 241's.
When are you installing & dyno'ing?
-chris
