01 SS TR224 on Mustang Dyno
#1
01 SS TR224 on Mustang Dyno
I want to thank Carl "CJTunes" for taking a lot of time to make sure my car was tuned the right way and running strong. Car put down 370/361 on a mustang dyno, running pretty warm. Solid torque curve. Pretty strong for a smaller cam. I think I am gonna get it on a dynojet just to see what it does.
Dyno video
http://www.youtube.com/watch?v=jK_QwWbCWPM
http://www.youtube.com/watch?v=dD1U6RLpRKQ
Dyno video
http://www.youtube.com/watch?v=jK_QwWbCWPM
http://www.youtube.com/watch?v=dD1U6RLpRKQ
Last edited by SpeedWorld; 05-10-2008 at 09:52 PM.
#5
Staging Lane
iTrader: (4)
Join Date: Mar 2007
Location: St. Paul, MN
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Great #'s again Nick, Good luck at the track next weekend. I am going to guess that you go 12.57 @ 114 MPH, that is of course if you can lay down a good 60'.
The #s are corrected with smoothing set to 3, torque and power curves are very smooth, this dyno consistently reads about 5% lower than others in the area.
Carl Thomas
CJTunes.com
midmetws6@yahoo.com
The #s are corrected with smoothing set to 3, torque and power curves are very smooth, this dyno consistently reads about 5% lower than others in the area.
Carl Thomas
CJTunes.com
midmetws6@yahoo.com
#6
Great #'s again Nick, Good luck at the track next weekend. I am going to guess that you go 12.57 @ 114 MPH, that is of course if you can lay down a good 60'.
The #s are corrected with smoothing set to 3, torque and power curves are very smooth, this dyno consistently reads about 5% lower than others in the area.
Carl Thomas
CJTunes.com
midmetws6@yahoo.com
The #s are corrected with smoothing set to 3, torque and power curves are very smooth, this dyno consistently reads about 5% lower than others in the area.
Carl Thomas
CJTunes.com
midmetws6@yahoo.com