382 Stroker LS1 Dyno Results!
Mods and car..
99 FRC Corvette M6
382 Lunati Stroker Kit
X1 Cam 112 LSA
Stage 2 Heads w 2.02 1.57 Valves
LS6 Intake
Katech Throttle Body
ASP Pulley
FLP Longtubes w/ cats
B&B PRT Exhaust
Blackwing CAI
LS1 Edit Tuning
RWHP 455 @ 6400 RPMS
RWTQ 440 @ 4800 RPMS
I am more than happy with these results. I still have more left in her! I am still running stock Rockers. Yella Terra 1.7 would yeild about 10 more RWHP. And the new electric water pump is worth another 10 RWHP. So 475 RWHP is very possible.
Hats off to GFORCE Performance in Pearland. Jay and Mark are top notch guys who did a great motor and clutch install for a good price. Thanks to Mike Savoy of Extreem Machines in League City for busting his *** to do my heads and assemble my motor in under a weeks time. And thanks to MTI for getting the beast tuned.
I know take it to the track! Soon......

I'll be very interested to see what power the YTs are worth. Im thinking about them for the X1 in my 387. I will also be interested in the EWP... Post back with results soon

That torque has got to be a real blast

chris
Trending Topics
The Best V8 Stories One Small Block at Time
The pistons are flat tops with valve reliefs(sp)
Injectors are SVO 30lb
The comp ratio is high around 11.7.1 I do have to add octane booster to every tank to reduce knock.
It hits 400 RWHP at around 4800 RPMS
My old dyno numbers with just cat back, FLP's, Blackwing and tuning were
344 RWHP + 111 RWHP = 455 RWHP
356 RWTQ + 84 RWTQ = 440 RWTQ
Thoose were the gains of the stroker.
But I "need" Yella Terras, LS1 Edit, and the boneheads in PCM tuning just started a Wideband O2 GP. Im *so* screwed.
oh and I could use some ZR1 style 11" rears with Nitto DRs.
dammit. Where can you donate plasma?

chris

I can't get enough of mine, see sig. below, but like you guys I'm tapped for funds too.

Well enjoy the new power and start saving for the LSX intake!!

Randy

Your hardtop should run 10s with that power and traction

Tony


