bolt-on ls1 vs. 01 cobra
#41
11 Second Club
Join Date: Aug 2005
Location: Tampa, FL
Posts: 804
Likes: 0
Received 0 Likes
on
0 Posts
Power302 huh? small world. He PM'd me about my setup on another board a few months back. With him in the car it weighs 2950. He has manual brakes/steering, tubular front end, LT's, EWP, etc. Oh and he was running ET Drags too. So there was a lot more done than what you had mentioned. Nice guy though. I told him his car needs more gear and he's shifting the car a little low (6700). I think he was going to put a shortrunner intake on the car next. I haven't heard from him since.
-Mark
-Mark
#42
Yeah he is porting another cobra manifold, hes been working on that for a while. He must have added the longtubes and changed to Slicks recently. I got stationed in tucson and he was knocking low 12's when I left home and he called me up fairly recently saying he got into the elevens and didn't mention any new new mods. I told you he had weight reduction done!!! Hell I remember him putting those cobra brakes onto a 4 cylinder mustang, lol. Like I said I'm not THAT into his business but for as little work that hes done that car flys down the 1/4.
#44
I dont know man, the way the nut swingers are talking that cobra will run mid 11's n/a... I think with the stall you will suck the plastic snake emblems off his fenders (from a dig)...
Last edited by 99_Z28; 01-14-2009 at 01:13 PM.
#46
TECH Senior Member
iTrader: (71)
o... and here is a race i had about 2 weeks ago....
cobra- stock
me/transam- stock
http://s250.photobucket.com/albums/g...stockCobra.flv
with that being said, i dont think the pusstang has a shot...
**waiting for my flame pony... hahaha
cobra- stock
me/transam- stock
http://s250.photobucket.com/albums/g...stockCobra.flv
with that being said, i dont think the pusstang has a shot...
**waiting for my flame pony... hahaha
#47
o... and here is a race i had about 2 weeks ago....
cobra- stock
me/transam- stock
http://s250.photobucket.com/albums/g...stockCobra.flv
with that being said, i dont think the pusstang has a shot...
**waiting for my flame pony... hahaha
cobra- stock
me/transam- stock
http://s250.photobucket.com/albums/g...stockCobra.flv
with that being said, i dont think the pusstang has a shot...
**waiting for my flame pony... hahaha
LOL gotta love the park bench wing, the car was about as fast as a park bench too.
#48
o... and here is a race i had about 2 weeks ago....
cobra- stock
me/transam- stock
http://s250.photobucket.com/albums/g...stockCobra.flv
with that being said, i dont think the pusstang has a shot...
**waiting for my flame pony... hahaha
cobra- stock
me/transam- stock
http://s250.photobucket.com/albums/g...stockCobra.flv
with that being said, i dont think the pusstang has a shot...
**waiting for my flame pony... hahaha
As for you......you're just an igrnorant tool...remind me alot of a guy named burnzilla. Both of you are absolutely clueless to cars outside of the ones you personally own.
#49
11 Second Club
Join Date: Aug 2005
Location: Tampa, FL
Posts: 804
Likes: 0
Received 0 Likes
on
0 Posts
Stalled AND Cammed and only mid 12's? I know the 60ft sucked but only 112mph? Talk a big game with that ET? See I can bench race with the best of them two. My wifes LS1 (A4) with a cutout, lid, and meter trapped 109. Somethings wrong with your setup.
-Mark
#50
I'm just wandering why take all that weight out of a 94-04 when there is a perfectly light fox in everybody's back yard. Thats some good times for his Cobra and yours Bitemark.
#51
***Repost Police***
Join Date: Dec 2005
Location: DFW, TX
Posts: 2,480
Likes: 0
Received 0 Likes
on
0 Posts
Swapping a DOHC 4.6 in a foxbody isn't exactly easy. Much easier to just replace some parts on the SN95. But I do think a ported head/cammed DOHC 4.6 with a T56 in a notchback would be a very fun car
#52
Someone did a Fox/terminator hybrid.....badass, but it was a lot of work.
#54
TECH Apprentice
Thread Starter
iTrader: (11)
Join Date: May 2007
Location: se michigan
Posts: 383
Likes: 0
Received 0 Likes
on
0 Posts
o... and here is a race i had about 2 weeks ago....
cobra- stock
me/transam- stock
http://s250.photobucket.com/albums/g...stockCobra.flv
with that being said, i dont think the pusstang has a shot...
**waiting for my flame pony... hahaha
cobra- stock
me/transam- stock
http://s250.photobucket.com/albums/g...stockCobra.flv
with that being said, i dont think the pusstang has a shot...
**waiting for my flame pony... hahaha
and once again with mustang stories
#55
"99 Z28 boltons, 3500 stall, hotcam. 12.4@112mph on street tires 1.97 60' (old tune) Coming soon M/T DR's and 11's"
Stalled AND Cammed and only mid 12's? I know the 60ft sucked but only 112mph? Talk a big game with that ET? See I can bench race with the best of them two. My wifes LS1 (A4) with a cutout, lid, and meter trapped 109. Somethings wrong with your setup.
-Mark
Stalled AND Cammed and only mid 12's? I know the 60ft sucked but only 112mph? Talk a big game with that ET? See I can bench race with the best of them two. My wifes LS1 (A4) with a cutout, lid, and meter trapped 109. Somethings wrong with your setup.
-Mark
I have the weakest cam you can run just about. As for my mph, bouncing off the limiter every gear and shifting at stock shift points dont do much for trap speeds. Dont worry, I will be right there with you come spring.....
#56
o... and here is a race i had about 2 weeks ago....
cobra- stock
me/transam- stock
http://s250.photobucket.com/albums/g...stockCobra.flv
with that being said, i dont think the pusstang has a shot...
**waiting for my flame pony... hahaha
cobra- stock
me/transam- stock
http://s250.photobucket.com/albums/g...stockCobra.flv
with that being said, i dont think the pusstang has a shot...
**waiting for my flame pony... hahaha
Looks like you raced this car....can you see the resemblance?
#57
holy ****.
YOu'll never believe this..well, maybe.....I saw a guy...probably SIXTY yrs old driving a Geo Metro...he had a wood spoiler on the back and a black wood hood scoop. Bunch of stickers and **** all over it....it was a torquise (sp?) metro...I nearly had to pull off the highway I was laughing so hard.
YOu'll never believe this..well, maybe.....I saw a guy...probably SIXTY yrs old driving a Geo Metro...he had a wood spoiler on the back and a black wood hood scoop. Bunch of stickers and **** all over it....it was a torquise (sp?) metro...I nearly had to pull off the highway I was laughing so hard.