What would it take to...
#1
Teching In
Thread Starter
Join Date: Jan 2009
Location: California
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
What would it take to...
Run an 11.xx time slip in an a4 trans am.
Street Trim:
17x9 - 17x10 ZR1's or tt2's with a drag radial on the rear (nitto or bfg)
34-3600 converter
Would:
TR230 / JAAM / FT LID / bbk long tubes / LS6 / 90mm tb / 3600 vig do it? / dyno tune / 3.73s
all considering good track prep, and driving, and a decent 60ft
Street Trim:
17x9 - 17x10 ZR1's or tt2's with a drag radial on the rear (nitto or bfg)
34-3600 converter
Would:
TR230 / JAAM / FT LID / bbk long tubes / LS6 / 90mm tb / 3600 vig do it? / dyno tune / 3.73s
all considering good track prep, and driving, and a decent 60ft
Last edited by Genesis; 01-25-2009 at 03:32 AM. Reason: added mods
#3
Teching In
Thread Starter
Join Date: Jan 2009
Location: California
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
#4
That should do it. I'm going with some M/T ET Street Radials for my 11sec attempt this spring. With the mods I already have in my sig, I should be there. But, right now, traction under 50mph is not happening.
#6
Teching In
Thread Starter
Join Date: Jan 2009
Location: California
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
10 Second Club
iTrader: (1)
Join Date: May 2006
Location: Jonesboro, LA
Posts: 1,126
Likes: 0
Received 0 Likes
on
0 Posts
That should do it. My car has run a best of 11.74 in full street trim. I am running a TSP 228R cam, Yank 3600 stall, stock 3.23 gears, and BFG drag radials. Car weighs 3,650 lbs.