Dynojet Dyno number with these mods?
#24
FormerVendor
iTrader: (45)
local shops that cater to carb guys have it, some race tracks, kart stores have it... it's pricey here in 5 gals but they ship it: http://www.cqconcepts.com/chem_methanol.php 5 gallons lasts a long time.
#26
LS1Tech Sponsor
iTrader: (12)
Glad the tuner read this before getting a head ache.
I would never run a STS without an intercooler or meth unless it was running just 4-5psi.
Also with only running 8-10psi I would choose an intercooler over just meth.I would run both and push 12-14lbs
Another thing,not a fan of Snow kit's.I hope it's atleast a progressive kit or it will be a bitch to tune.(Alky control kicks *** for control))
I would never run a STS without an intercooler or meth unless it was running just 4-5psi.
Also with only running 8-10psi I would choose an intercooler over just meth.I would run both and push 12-14lbs
Another thing,not a fan of Snow kit's.I hope it's atleast a progressive kit or it will be a bitch to tune.(Alky control kicks *** for control))
#27
Launching!
iTrader: (5)
Join Date: Oct 2008
Location: eastern shore, VA
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
just my .02 cents but i have had alot of shops tell me on my past boosted gen 3's that anything over 10psi is getting risky. something about the top ring lands breaking or cracking
p.s. i boosted my 5.3 suburban with a maggy non intercooled 10psi with meth, and my silverado with a procharger at 10 psi with intercooler no meth
p.s. i boosted my 5.3 suburban with a maggy non intercooled 10psi with meth, and my silverado with a procharger at 10 psi with intercooler no meth